Gigabyte 7CN700ID User Manual page 29

DRAM Command Rate
2T Command
1T Command
RDSAIT mode
Auto
Manual
RDSAIT selection
Set RDSAIT to 03
VGA Share Memory
Disabled
16M
32M
64M
Direct Frame Buffer
Disabled
Enabled
PCI Delay transaction
Disabled
Enabled
System BIOS Cacheable
Disabled
Enabled
Init Display First
Set the init display first to PCI slot. (default: PCI Slot)
Set DRAM Command rate to 2T. (Default value)
Set DRAM Command rate to 1T.
Auto detect RDSAIT mode. (Default value)
Set RDSAIT mode by manually.
(Default value:03)
Disabled this function.
Set VGA share memory to 16M.
Set VGA share memory to 32M.
Set VGA share memory to 64M.(Default value)
Disabled direct fram buffer function.
Enabled direct fram buffer function. (Default value)
Disabled PCI delay transaction.
Enabled PCI delay transaction.(Default value)
Disabled System BIOS Cacheable.
Enabled System BIOS Cacheable.(Default value)
- 29 - BIOS Setup