Gigabyte 7CN700ID User Manual page 16

10) BAT (Battery)
11) CLR_CMOS (Clear CMOS)
You may clear the CMOS data to its default values by this header. To clear CMOS, temporarily
short the two pins. Default doesn't include the jumper to avoid improper use of this header.
GA-7CN700ID Motherboard
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recom-
mended by the manufacturer.
Dispose of used batteries according to the manufacturer's
instructions.
If you want to erase CMOS...
1. Turn off the computer and unplug the power cord.
2. Gently take out the battery and put it aside for about one
minute. (Or you can use a metal object to connect the
positive and negative pins in the battery holder to makethem
short for five seconds.)
3. Re-install the battery.
4. Plug the power cord in and turn on the computer.
Open: Normal
Short: Clear CMOS
- 16 -