Memory Card; Insert The Memory Card - Nokia 002J900 User Manual

A GPRS packet data connection is active (network service).
indicates that the connection is on hold and
connection is available.
A packet data connection is active in a part of the network
that supports EGPRS (network service).
connection is on hold and
The icons indicate that EGPRS is available in the network, but
your device is not necessarily using an EGPRS connection to
transfer data.
A UMTS packet data connection is active (network service).
indicates that the connection is on hold and
connection is available.
High-speed downlink packet access (HSDPA) is supported
and active (network service).
is on hold and that a connection is available.
You have set the device to scan for wireless LANs, and a
wireless LAN is available (network service).
A wireless LAN connection is active in a network that
uses encryption.
A wireless LAN connection is active in a network that does
not use encryption.
Bluetooth connectivity is on.
Data is being transmitted using Bluetooth connectivity.
When the indicator is blinking, your device is trying to
connect with another device.
A USB connection is active.
© 2009 Nokia. All rights reserved.
that a
indicates that the
that a connection is available.
that a
indicates that the connection
Synchronisation is in progress.

Memory card

Use only compatible microSD and microSDHC cards approved
by Nokia for use with this device. Nokia uses approved
industry standards for memory cards, but some brands may
not be fully compatible with this device. Incompatible cards
may damage the card and the device and corrupt data stored
on the card.

Insert the memory card

A memory card may be already inserted in the device. If not,
do the following:
1. Open the cover of the
memory card slot.
Your device
23