Nokia 002B370 User Manual page 81

G l o s s a r y
PIN2
POP3
SIP
SSID
Streaming
UMTS
UPIN
USIM
USSD command
VoIP
VPN
WAP
WEP
WLAN
WPA
WPA2
© 2007 Nokia. All rights reserved.
The PIN2 code is supplied with some SIM cards. The PIN2 code is required to access certain
functions supported by the SIM card. The length of the PIN2 code is 4 to 8 digits.
Post office protocol, version 3. A common mail protocol that can be used for accessing your
remote mailbox.
Session initiation protocol. SIP is used for creating, modifying, and terminating certain types
of communication sessions with one or more participants.
Service set identifier. SSID is the name that identifies the specific wireless LAN.
Streaming audio and video files means playing them directly from the web without
downloading them first to your device.
Universal mobile telecommunications system. UMTS is a 3G mobile communication system.
Besides voice and data, UMTS enables audio and video delivery to wireless devices.
When you use your device in GSM and UMTS networks, multiple data connections can be active
at the same time, and access points can share a data connection. In the UMTS network, data
connections remain active during voice calls. You can, for example, browse the web faster
than previously possible while simultaneously speaking on the phone.
PIN code used in UMTS network.
SIM card used in UMTS network.
A service request, such as request to activate an application or configure various settings
remotely, that you can send to your operator or service provider with your device.
Voice over internet protocol technology. VoIP is a set of protocols that facilitate phone calls
over an IP network, such as the internet.
Virtual private network. VPN creates a secure connection to compatible corporate intranet
and services, such as e-mail.
Wireless application protocol. WAP is an international standard for wireless communication.
Wired equivalent privacy. WEP is an encryption method that encrypts data before it is
transmitted in WLAN.
Wireless local area network. A wireless LAN connection is established when you create a data
connection using a wireless LAN internet access point. The active wireless LAN connection is
ended when you end the data connection.
If you move the device to another location within the wireless LAN and out of range of a
wireless LAN access point, the roaming functionality can automatically connect your device
to another access point that belongs to the same network. As long as you remain within range
of access points that belong to the same network, your device can stay connected to the
network.
Wi-Fi Protected Access. Security method for WLAN.
Wi-Fi Protected Access 2. Security method for WLAN.
81