Restore Original Settings; Telephone Settings; Call Settings; Network Settings - Nokia 002B370 User Manual

S e t t i n g s
To set a new lock code, select
new code twice. The new code can be 4-255 characters long. Both alphabets and digits can be used, and both uppercase and
lowercase alphabets are possible. The device notifies you if the lock code is not properly formatted.
To set the device to ask for the lock code when an unknown, new SIM card is inserted into your device, select
card Lock if SIM card changed. The device maintains a list of SIM cards that are recognized as the owner's cards.
>

Restore original settings

To restore the original device settings, select
device may take a longer time to power on. Documents, contact information, calendar entries, and files are unaffected.

Telephone settings

Select Tools Settings
> >
Select from the following:
Call — Define general call settings.
•
Call divert — Define your call divert settings.
•
Call barring — Define your call barring settings.
•
Network — Adjust the network settings.
•

Call settings

To display your phone number to the person you are calling, select
whether your caller ID is sent, select
To display your net call address to the person you are calling using a net call, select
To be notified of a new incoming call while you have a call in progress, select
if the function is active on the network, select
To select whether net calls alert or not, select
To set the default call type, select
make net calls.
To send a text message automatically to the person who is calling you informing why you cannot answer the incoming call,
select Call Reject call with SMS
>

Network settings

Select Tools Settings
> >
To select the network mode, select
automatically between networks.
To select the operator, select
select the network automatically.
To set the device to indicate when it is used in Micro Cellular Network (MCN), select

Connection settings

Select Tools Settings
> >
Select from the following:
Access points — Set up new or edit existing access points. Some or all access points may be preset for your device by your
•
service provider, and you may not be able to create, edit, or remove them.
Packet data — Determine when packet data connections are used, and enter the access point if you use your device as a
•
modem for a computer.
Wireless LAN — Determine if the device displays an indicator when a WLAN is available, and how often the device searches
•
for networks.
Data call — Set the time-out period after which data call connections automatically end.
•
SIP settings — View or create session initiation protocol (SIP) profiles.
•
Internet tel. — Define settings for net calls.
•
Configurations — View and delete trusted servers from which your device may receive configuration settings.
•
To obtain information about WLAN or subscribing to a packet data service and the appropriate connection and configuration
settings, contact your service provider.
The settings available for editing may vary.
© 2007 Nokia. All rights reserved.
Phone and SIM card Lock
>
Factory settings. To do this, you need your device lock code. After resetting, the
> Phone.
See "Call divert" on page 23.
See "Call barring" on page 24.
Set by network.
Options
Call Internet call
>
Call Default call type
>
> Yes. To set the text for the message, select
Phone > Network.
>
Network mode and
Operator selection and Manual
> Connection.
code. The preset lock code is 12345. Enter the old code and then the
Call Send my caller ID
>
Call
Check status.
>
alert. You are notified of missed net calls with a notification.
and select Voice call if you make a GSM calls, or
Call
Dual mode, UMTS, or GSM. In the dual mode, the device switches
to choose from available networks, or
67
> Yes. To let the network determine
Call Send my internet call ID
>
Call waiting Options
> >
Internet call
Message text.
>
Automatic
Cell info display > On.
Phone and SIM
> Yes.
> Activate. To check
if you
to have the device