Table of Contents
Advertisement
S e t t i n g s
To set the time-out period after which data calls automatically end if no data has been transferred, select
User defined
to enter the time yourself or
Session initiation protocol (SIP) settings
Select
Tools
Settings
>
>
Session initiation protocols (SIP) are used for creating, modifying, and terminating certain types of communication sessions
with one or more participants (network service). SIP profiles include settings for these sessions. The SIP profile used by default
for a communication session is underlined.
To create a SIP profile, select
To select the SIP profile you want to use by default for communication sessions, select
Edit SIP profiles
Select
SIP settings
Options
>
Profile name
— Enter a name for the SIP profile.
•
Service profile
— Select
•
Default access point
— Select the access point to use for the internet connection.
•
Public user name
— Enter your user name received from your service provider.
•
Use compression
— Select if compression is used.
•
Registration
— Select the registration mode.
•
Use security
— Select if security negotiation is used.
•
Proxy server
— Enter the proxy server settings for this SIP profile.
•
Registrar server
— Enter the registration server settings for this SIP profile.
•
The settings available for editing may vary.
Edit SIP proxy servers
Select
SIP settings
Options
>
Proxy servers are intermediate servers between a browsing service and its users used by some service providers. These servers
may provide additional security and speed up access to the service.
Select from the following:
Proxy server address
— Enter the host name or IP address of the proxy server in use.
•
Realm
— Enter the proxy server realm.
•
User name
and
Password
•
Allow loose routing
— Select if loose routing is allowed.
•
Transport type
— Select
•
Port
— Enter the port number of the proxy server.
•
Edit registration servers
Select
SIP settings
Options
>
Select from the following:
Registrar server address
•
Realm
— Enter the registrar server realm.
•
User name
and
Password
•
Transport type
— Select
•
Port
— Enter the port number of the registrar server.
•
Net call settings
Select
Tools
Settings
>
>
To create a new net call profile, select
To edit an existing profile, select
Configurations
Select
Tools
Settings
>
>
You can receive messages from your service provider or company information management containing configuration settings
for trusted servers. These settings are automatically saved in Configurations. You may receive configuration settings for access
points, multimedia, or e-mail services, and IM or synchronization settings from trusted servers.
© 2007 Nokia. All rights reserved.
Unlimited
Connection
SIP
settings.
>
>
Options
New SIP profile
>
New SIP profile
or Edit, and select from the following:
>
IETF
or
Nokia
3GPP.
New SIP profile
or
>
— Enter your user name and password for the proxy server.
UDP
or TCP.
New SIP profile
or
>
— Enter the host name or IP address of the registrar server in use.
— Enter your user name and password for the registrar server.
UDP
or TCP.
Connection
Internet
>
>
Options
New
>
Options
> Edit.
Connection
> Configurations.
>
to keep the connection active until you select
Use default profile
>
Edit
Proxy
server.
>
Edit
Registrar
server.
>
tel..
profile.
70
Options
or
Use existing
profile.
Options
Default
>
Online
time. Select
> Disconnect.
profile.
Advertisement
Table of Contents
