Related Manuals for DVP RD 2D
Summary of Contents for DVP RD 2D
- Page 1 VACUUM TECHNOLOGY OPERATING AND MAINT ENANCE INSTRUCTIONS (Translation of the original instructions) OIL-BATH VANE VACUUM PUMPS RD 2D RC 4M RC 4D RC 8M RC 8D DB 2D DC 4D DC 8D DC 16D...
-
Page 2: Table Of Contents
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D INDEX INTRODUCTION ..................................2 GENERAL INFORMATION .............................. 2 MANUFACTURER INFORMATION ..........................2 METHOD OF CONSULTATION ............................ -
Page 3: Introduction
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D INTRODUCTION GENERAL INFORMATION This manual is meant to provide you with important information for the safety of persons involved in pump use and maintenance. -
Page 4: Personal Protection Equipment
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D PERSONAL PROTECTION EQUIPMENT This manual assumes that the pump has been installed in workplaces, which comply with all mandatory safety requirements;... -
Page 5: Pictograms
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D Hazard generated by pressure The pump tank is pressurised. Do not open and do not leave oil filler or drain plugs open during operation. -
Page 6: Pump Description
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D PUMP DESCRIPTION INTENTED USE AND CONTRAINDICATIONS 3.1.1 INTENTED USE DVP products covered by this manual are intended for PROFESSIONAL use only. -
Page 7: Dimensions And Characteristics
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D DIMENSIONS AND CHARACTERISTICS 3.5.1 Model: RD 2D Only present on special versions... -
Page 8: Model: Rc 4M - Rc 4D - Rc 8M - Rc 8D
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D Model: RC 4M – RC 4D – RC 8M – RC 8D 3.5.2... -
Page 9: Model: Db 2D
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D 3.5.3 Model: DB 2D Intake Information plate Start / Stop switch (only 1~) -
Page 10: Model: Dc 4D - Dc 8D - Dc 16D
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D Model: DC 4D – DC 8D – DC 16D 3.5.4 ... -
Page 11: Installation
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D INSTALLATION RECEIPT AND CONTENT VERIFICATION Upon receipt of the pump, verify that the packaging is intact. If everything is intact, unpack the contents and check the pump. -
Page 12: Environmental Conditions
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D ENVIRONMENTAL CONDITIONS The pump must be installed and used in a covered and adequately lit location. The installation area must meet all requirements of height, air circulation and meet the requirements imposed by existing legislation. -
Page 13: User System
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D USER SYSTEM Make sure that no harmful substances contaminate the user system during installation. -
Page 14: Wiring
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D 4.9.2 WIRING WARNING Check that network voltage and frequency correspond to values contained on the motor rating plate. -
Page 15: Operating Instructions
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D OPERATING INSTRUCTIONS OPERATION Checks to be performed before start-up: • The pump is supplied without any oil in it, with the exception of the RC 4M pump, model OEM. Use the supplied oil or, alternatively, an alternative lubricant of another brand but with similar characteristics;... -
Page 16: Oil Cleaning
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D 5.1.3 OIL CLEANING When oil looks dark or cloudy or when oil level rises, this means that oil contains foreign matters. -
Page 17: Maintenance
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D MAINTENANCE GENERAL WARNINGS For good maintenance: • Immediately verify the causes of any malfunctions (excessive noise, overheating, etc.);... -
Page 18: Check And Clean Gas Ballast
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D • Close drain plug and fill in fresh oil through the filler plug up to mid-range on the oil sight glass;... -
Page 19: How To Return The Pump
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D HOW TO RETURN THE PUMP The product may only be returned after prior agreement with the supplier, who will provide the authorisation number that must accompany the material delivered and should be duly complete in its entirety. -
Page 20: Troubleshooting
Operating and Maintenance Instructions RD 2D – RC 4M – RC 4D – RC 8M – RC 8D – DB 2D – DC 4D – DC 8D – DC 16D TROUBLESHOOTING DAMAGE CAUSE REMEDY No voltage Provide power supply Thermal switch has tripped... -
Page 21: General Conditions Of Sale
GENERAL CONDITIONS OF SALE D.V.P. Vacuum Technology s.p.a. supplies products exclusively for professional clientele, hence, excluding consumers. PRODUCT WARRANTY TERMS AND CONDITIONS D.V.P. Vacuum Technology s.p.a. guarantees that the product is free from material or manufacturing defects for a period of 24 months of normal use from the shipping date. This period is of 6 months of normal use for products subject to repair not under warranty. - Page 22 D.V.P. Vacuum Technology s.p.a. Via Rubizzano, 627 40018 San Pietro in Casale (BO) – Italy Ph +3905118897101 Fx +3905118897170 www.dvppumps.com...
Need help?
Do you have a question about the RD 2D and is the answer not in the manual?
Questions and answers