Haier A67 User Manual page 55

Insert and pull out the T-Flash card
Remove the battery cover, take out the battery and insert / pull out the T-Flash card.
Power on/powe off
In standby mode, long press the end key.
PIN code
If your cell phone has enabled PIN code protection, there will be prompt for entering PIN code.
If wrong PIN code is entered for three times, SIM card will be automatically locked. You have
to enter PUK code so as to unlock it. PIN code is related to SIM card instead of the cell phone,
and is provided by network service operator.
Phone lock
The default password is 0000.
PUK code
PUK code, referring to personal unlock code, is used to unlock SIM card that is locked because
of wrong input of PIN code. If wrong input of PUK code amounts to ten times, SIM card will lose
effi cacy. PUK code is provided by network service operator.
7