Environmental Specifications
Environmental Specifications
Table 3-2
Caution:
Application Interface Specifications
Table 3-3
signals.
Important:
Important:
48
gives the environmental operating conditions of the C24 module.
Exceeding the values may result in permanent damage to the module.
Table 3-2: Environmental Ratings
Parameter
Standard Operating
Temperature
Storage Temperature
ESD
summarizes the DC electrical specifications of the application interface connector
Interface signals that are not used by the customer application must be left
unconnected. C24 incorporates the necessary internal circuitry to keep unconnected
signal in their default state. Do not connect any components to, or apply any voltage
on, signals that are not used by the application.
Signals that are defined as "Do Not Use", or DNU, must remain externally
unconnected in any case. These signals are reserved for future use.
C24 Module Hardware Description
Conditions
Min
-30
-40
At antenna connector
Air
Contact
At interface connector
Max
Unit
+85
°C
+85
°C
KV
± 15
± 6
± 1
December 15, 2008