Serial Interface During Low Power Mode; Terminating Low Power Mode; Cts Signal During Sleep Mode - Motorola 8900 - Blackberry Curve Cell Phone OEM Car Charger Developer's Manual

Cdma module
Table of Contents

Advertisement

Serial Interface During Low Power Mode

During low power mode the C24 serial interfaces are disabled. This is indicated by the CTS
signal high state.
The C24 wakes up periodically from low power mode to page the network for any incoming calls
or data. After this short paging is completed, C24 returns to low power mode. During this short
awake period, the serial interfaces are enabled and communications with the module is possible.
The CTS_N signal is alternately enabled and disabled synchronously with the network paging
cycle. CTS_N is enabled whenever C24 awakes to page the network. This indicates the C24 serial
interfaces are active (see
Figure 2-7: CTS Signal During Sleep Mode
The periodical enabling and disabling of the CTS_N signal during low power mode can be
controlled by the AT+MSCTS command.
Setting AT+MSCTS=1 permanently disables the serial interface during low power mode, even
during a network page by C24. The CTS_N signal is disabled, and therefore the serial interfaces
are blocked.

Terminating Low Power Mode

Terminating the low power mode, or wake-up, is defined as the transition of the C24 operating
state from Sleep mode to Idle mode. There are several ways to wake-up C24 from low power
mode as described below.
Important:
December 15, 2008
Figure
2-7).
During power saving mode the C24 internal clocks and circuits are disabled, in
order to minimize power consumption. When terminating the power saving mode,
and switching to Idle mode, C24 requires a minimal delay time to reactivate and
stabilize its internal circuits before it can respond to application data.
This delay is typically of 15 milliseconds, and is also indicated by the CTS_N signal
inactive (high) state. The delay guarantees that data on the serial interface is not lost
or misinterpreted.
C24 Module Hardware Description
Chapter 2: Hardware Interface Description
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

C24

Table of Contents