Page 2
How to obtain your certificate Download the user manual from Elebia’s website or through this QR code. Read the user manual. Take the certification exam Once a year, you’ll be reminded to update your certification Disclaimer: This user manual is for informational purposes only. The manufacturer reserves the right to modify its specifications without prior notice.
Table of Contents General Information General Precautions Restrictions Main Features of the evo2 / evo2L automatic lifting hook Main Features of the evo5 to evo25 automatic lifting hooks Specifications Regulatory Standards Remote Controls FCC, IC, CE & ARIB evo2 / evo2L Battery & Charger evo5 to evo25 Battery &...
It is the sole responsibility of the operator to ensure the correct manipulation and handling of any load while using any of the elebia products. Automated processes in any lifting operation, whether attaching and/or releasing any load, or other, must always be submitted to visual inspection of the operator.
DO NOT operate the evo automatic lifting hook if it has not been properly secured. DO NOT lift nor pull more than the working load limit that is indicated per evo automatic lifting hook and which is included in the CE stamp. DO NOT use the evo automatic lifting hook to lift, sustain or transport people.
Top link Can be customized in order to adapt itself to any situation. Swivel with bearings The bearings allow the evo2 / evo2L automatic lifting hook to rotate freely. Swivel with lock The operator can lock it at every 180º position.
Specifications Model mm / in. evo2 / evo2L evo5 to evo25 Disclaimer: This user manual is for informational purposes only. The manufacturer reserves the right to modify its specifications without prior notice.
- Each mechanism is delivered with the CE stamp and a declaration of CE conformity. - elebia is a member of F.E.M. (European Federation of Materials Handling). Disclaimer: This user manual is for informational purposes only. The manufacturer reserves the right to modify its specifications without prior notice.
The eMINI remote control does not detect the evo lifting hook For more information on the eMINI remote control, plea- se refer to the eMINI remote control user manual visiting www.elebia.com/downloads Power Supply One 3V lithium battery (CR2032) Available Code Combinations...
Dimensions: 100 x 100 x 40 mm. / 3.94 x 3.94 x 1.57 in For more information on the eINST remote control, please refer to the eINST remote control user manual. www.elebia.com/downloads eMAX The eMAX is our most advanced remote control. It displays all the info in a big high-resolution screen and a high-profile key- pad, yet remains handy and lightweight.
Charge Complete Indicator For more information on the charger, please refer to the evo2 battery charger user manual. www.elebia.com/downloads Disclaimer: This user manual is for informational purposes only. The manufacturer reserves the right to modify its specifications without prior notice.
-20 ºC to 60 ºC / -4 ºF to 140 ºF Weight 400 g / 14.10 oz. · Charging time: 3h (using elebia charger) For more information on the S40 Automatic Shackle Battery, please refer to the S40 Automatic Shackle Battery control user manual.
The start-up is done by inserting the battery. Installation The battery must be fully charged. Attach the evo automatic …insert the battery… …and connect the battery by lifting hook to the crane... pressing the ON/OFF button. Lifting Procedure The magnet of the evo automatic lifting hook generates a magnetic field that attracts, centers and orients the sling, masterlink or rigging gear.
It is the sole responsibility of the operator to ensure the correct manipulation and handling of any load while using any of the elebia products. Automated processes in any lifting operation, whether attaching and/or releasing any load, or other, must always be submitted to visual inspection of the operator.
End of life The device must be removed from service once the SL is reached. Using an Evo device beyond its desig- nated service life can lead to serious safety risks, including potential failure during use, breakage, and safety hazards for personnel and equipment. For this reason, the evo hook must be discarded after reaching its maximum life cycle.
Conformity Declaration and Manufacturer’s Certificate ELEBIA AUTOHOOKS, S.L.U., with registered office at Plaça Pere Llauger Prim, naus 10-11, Polígon Indus- trial Can Misser, 08360, Canet de Mar, (Barcelona), Spain, Tax Identification Certificate B65770265, and ISO 9001 Certificate No. 9000041 DECLARES:...
Inspection and Maintenance The purpose of this document is to set the guidelines for inspection and maintenance of evo2 - evo25. Definitions Normal service: service that involves operation with various weights within the rated load limit, avera- ging less than 65% of rated load limit.
A visual inspection shall be carried out to check for the items listed in the Annex. Conditions such as the listed or any other condition that may result in a hazard, shall cause the evo2 - evo25 to be removed from service. The evo2 - evo25 shall not be returned to service until approved by a qualified person.
Annex. Periodic Inspection Record Document Inspection Details Date Performed by Equipment SN Location Service Type Partial Cycles Total Cycles Inspection Checklist Check Item Pass Fail Legible CE plate (WLL, serial number, SF, …) LEDs fully operational (only applicable if bumper with LEDs is installed) Complete hook range of motion Proper safety latch movement (not applicable if rigid latch installed) Stretched, bent, twisted, distorted, elongated, cracked or broken load-bearing...
Page 20
Plaça Pere Llauger Prim, Naus 10-11 Polígon Industrial Can Misser 08360 Canet de Mar (Barcelona) Spain www.elebia.com info@elebia.com...
Need help?
Do you have a question about the evo2 and is the answer not in the manual?
Questions and answers