Download Print this page

Secret Lab MAGNUS Pro Assembly Manual And User Manual page 5

Sit-to-stand metal desk
Hide thumbs Also See for MAGNUS Pro:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
GROUNDING INSTRUCTIONS
Grounding Pin
WARNINGS AND CAUTION
PLEASE READ PRIOR TO INSTALLATION AND USE
Ensure you have received all parts according to the What's In the Box section (pg.4) prior to installation. If any parts are
missing or faulty, contact the Secretlab support team for replacements. The Secretlab MAGNUS Pro is to be assembled by
at least two people. This product contains small items that could be a choking hazard if swallowed. Keep these items away
from children and pets. Do not overtighten the screws during installation.
This desk is not intended for use by
children without adult supervision.
Do not exceed the maximum load capacity of the
Metal Desk Top (120kg/265lb, inclusive of the
Metal Desk Top). Do not load the Hinged Rear Cover.
Metal Desk Top (1.5m) Weight: 25.5kg/56.2lb
Metal Desk Top (1.77m) Weight: 32.9kg/72.5lb
Do not place your hand or fingers between the
Hinged Rear Cover and Metal Desk Top.
Do not drag the desk across the floor.
Do not wobble the desk forcefully on purpose.
Maintenance tasks may only be carried out by authorized and qualified personnel. For more information,
please get in touch with us via our contact page at secretlab.co/contact. For cleaning instructions of your
Secretlab MAGNUS Pro, refer to the Secretlab MAGNUS Pro Aftercare Guide.
WARNING: This product is for use on a nominal 100-240 volt circuit and
has a grounding plug. Use only the cord provided. Make sure that the
Grounded Outlet
product is connected to an outlet having the same configuration as the
plug. Do not modify the plug provided with the product. No adapters
are to be used with this product. Keep cord away from heated surfaces.
Grounded Outlet Box
Do not stand on the desk.
Do not use the desk as a climbing aid.
Do not sit on the desk.
Do not crawl or lie under the desk frame.
It is good practice to partially screw all
fasteners in place before fully tightening
(in a diagonal sequence when required).
Do not overtighten the fasteners.
2

Advertisement

loading
Need help?

Need help?

Do you have a question about the MAGNUS Pro and is the answer not in the manual?

This manual is also suitable for:

Magnus pro xl