Secret Lab MAGNUS Pro Assembly Manual And User Manual page 16

USAGE INSTRUCTIONS
Control Panel Features
STANDBY SWITCH. The Control Panel can be turned off to prevent accidental activation or movement of the desk.
Slide the switch to the right to turn it on. Slide it to the left to turn it off.
CALIBRATION/RESET. The Secretlab MAGNUS Pro must be calibrated prior to first use, after disconnection from the
power supply, and after any impact on the Metal Desk Top. Slide the Standby Switch to the right to turn the Control Panel on.
Press and hold the
position if it is not already at the lowest position. Do not release the button until a beep is heard. The reset process is finished.
HEIGHT ADJUSTMENT. Press and hold the
the / button to lift/lower the desk precisely.
SAVE HEIGHT INTO MEMORY. To set into memory the desired height for either seated or standing positions, use the three
memory position buttons. Use the
"1, 2, or 3" button to assign the current height to a number on the Control Panel. To bring your desk back to the assigned
heights, press the numbered button.
Troubleshooting
If you are having trouble with your Secretlab MAGNUS Pro, try these simple steps below. If problem persists, please refer
to the Secretlab MAGNUS Pro Troubleshooting Guide or get in touch with us via our contact page at secretlab.co/contact,
and our expert support team will get back to you as soon as possible.
PERFORM THE RESET PROCEDURE. Press and hold the
The Secretlab MAGNUS Pro will move down slowly to the lowest position. Do not release the button until a beep is heard.
Note: The Control Box does not reset by being unplugged and plugged back in.
CHECK ALL WIRED CONNECTIONS. Check that all cables are securely connected to the Control Box and that the
Secretlab MAGNUS Pro has power.
CHECK FOR OBSTRUCTIONS. Confirm that there is nothing obtructing your desk's motion, clearing out anything that is
too close - above, below, or beside it. These obstacles may trigger the anti-collision feature.
CHECK THE CONTROL BOX. Check that the Control Box is attached firmly to the Metal Desk Top. If it is not secured, the
anti-collision feature will be falsely triggered and your desk will not move properly. Refer to the Secretlab MAGNUS Pro
Troubleshooting Guide if the anti-collision feature continues to be falsely triggered.
POWER CYCLE THE CONTROL BOX. In the unlikely event that an error occurs, and the Secretlab MAGNUS Pro is
unresponsive, disconnect power to the desk for at least 10 seconds to rest the Control Box. Reconnect power to the
desk and perform the reset procedure.
Desk Height
button. The display will show "
/
/ button to move your desk to the desired height. Press the "S" button. Press the
Up and Down Memory Position
" and the desk will start moving downward and to the lowest
button to lift/lower the desk to your desired height. Press and release
button until the digital display shows "
Standby Switch
(On Position)
Save Standby Switch
(Off Position)
".
13