Download Print this page
AKG C680BL Specifications
AKG C680BL Specifications

AKG C680BL Specifications

Table microphone

Advertisement

Quick Links

Description
The C 680 BL is a boundary layer condenser microphone
with a cardioid pattern intended for table use, lecterns, and
houses of worship. The transducer is internally shock
mounted for immunity to impacts on the mounting surface.
The microphone is provided with a roll of non-staining
double-sided adhesive for positive mounting of the
microphone to a table or other flat architectural detail.
The microphone has a sensitivity of 23 mV/Pa and can
directly drive many microphone input stages with limited gain
reserve. The microphone is phantom powered over the range
from 9 to 52 volts dc.

Specifications

Transducer Principle:
Condenser prepolarized
Frequency Range:
60–20,000 Hz
Polar Pattern:
Cardioid
Sensitivity at 1,000 Hz:
23 mV/Pa (-32 dBV)
30 mV/Pa (-30 dBV)
Equivalent Noise Level: < 27 dB-A
Sound Pressure Level for 1% THD: 115 dB
S/N Ratio (A-weighted): > 67 dB
Electr. Impedance:
< 200 ohms
Load Impedance:
> 2000 ohms
Power Requirement:
9–52 volts phantom powering
Connector:
3-Pin XLR type
Cable Length:
3 m (10 ft.)
Finish:
Non-reflective black
Size:
3.8 x 2.6 x 0.8 in.
(97 x 67 x 20 mm)
Net/Shipping Weight:
3.5/10 oz. (100 g/284 g)
Included Accessories:
Phantom power adapter,
adhesive tape
Optional Accessories:
B 18 Battery power supply
N 62 E AC Power supply
C 680 BL
Table Microphone
Features
• Small & inconspicuous
• Shock mounted transducer
• Unidirectional pickup
• Repaintable

Advertisement

loading
Need help?

Need help?

Do you have a question about the C680BL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AKG C680BL

  • Page 1: Specifications

    Description The C 680 BL is a boundary layer condenser microphone with a cardioid pattern intended for table use, lecterns, and houses of worship. The transducer is internally shock mounted for immunity to impacts on the mounting surface. The microphone is provided with a roll of non-staining double-sided adhesive for positive mounting of the microphone to a table or other flat architectural detail.
  • Page 2: Architects And Engineers Specifications

    Note: No other warranty, written or oral is authorized by AKG Acoustics, Inc. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied warranty lasts, so the above exclusions and limitation may not apply to you.