Jabra Elite 8 Active Frequency Asked Questions

Jabra Elite 8 Active - Navy
How do I pair my Jabra Elite 8 Active with my mobile device?
To pair your headset with your mobile device or tablet, follow these
steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn on your earbuds by removing them from the charging case.
Alternatively, simultaneously press and hold (2 second) the Left and
Right buttons.
To enter pairing mode, simultaneously press and hold (3 seconds) the
Left and Right buttons on the earbuds, until the pairing notification
is announced in the earbuds.
The earbuds are now ready to pair with your mobile device.
Note
If you want to use just one earbud, you must still pair both earbuds
with your mobile device. After the pairing, you can place one of the
earbuds in the charging case.
3. To pair, go to the Bluetooth menu on your mobile device and select
Jabra Elite 8 Active from the list. If the Jabra device is listed more
than once, select the entry showing the headphone icon. Enter
"0000" (four zeros) if you are asked for a pin code.
In daily use, when you turn on the earbuds, they will automatically
reconnect with the last previously paired device, if it is turned on and
within range.
https://www.jabra.com/en-hk/supportpages/jabra-elite-8-active/100-99160701-
98/faq/36e9fed9-b39c-4997-8aee-c80c4e9e3616
13/03/2025 21:27
Page 1 of 2