Jabra Elite 8 Active Pairing Manual

How do I pair my Jabra Elite 8 Active with my mobile device

To pair your headset with your mobile device or tablet, follow these steps.

1. Turn on the Bluetooth setting on your mobile device.
2. Turn on your earbuds by removing them from the charging case. Alternatively, simultaneously press and hold (2 second) the Left and Right buttons.
   To enter pairing mode, simultaneously press and hold (3 seconds) the Left and Right buttons on the earbuds, until the pairing notification is announced in the earbuds.
   The earbuds are now ready to pair with your mobile device.
   
   Note
   If you want to use just one earbud, you must still pair both earbuds with your mobile device. After the pairing, you can place one of the earbuds in the charging case.
3. To pair, go to the Bluetooth menu on your mobile device and select Jabra Elite 8 Active from the list. If the Jabra device is listed more than once, select the entry showing the headphone icon. Enter "0000" (four zeros) if you are asked for a pin code.

In daily use, when you turn on the earbuds, they will automatically reconnect with the last previously paired device, if it is turned on and within range.
If pairing is not successful, try the pairing steps again, or try pairing with a different Bluetooth device.