Safety notes Please read this manual carefully and completely before you use the device for the first time. The device may only be used by qualified personnel and repaired by MRC personnel. Damage or injuries caused by non-observance of the manual are excluded from our liability and not covered by our warranty.
Description PCE-RCM-10 is a sort of exquisite concise and efficient detector launched by MRC recently, which is integrated with PM2.5, PM10, temperature and humidity detection function. This device has adopted laser scattering weight test method, professional structure design, good fan and advanced particulate matter algorithm, which can detect the PM2.5&PM10 accurately and...
Function description Colour LCD Power button Sensor air inlet Sensor outlet USB connector Power ON/OFF Switch on: When meter is off, press and hold power button for a few seconds until you hear a beep tone. Switch off: When meter is on, press and hold power button for a few seconds until you hear a beep tone.
Detection Mode When the device is started, the display shows the current value of PM 2.5 in the middle. The evaluation of the measured value is shown by the colour in which it is showsn. Green means good, yellow means neither good neither bad, red means bad. The quality of PM 2.5 is also displayed in a colour scale.
Disposal For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament applies. Due to the contained pollutants, batteries must not be disposed of as household waste. They must be given to collection points designed for that purpose. In order to comply with the EU directive 2012/19/EU we take our devices back.
Need help?
Do you have a question about the RCM-10 and is the answer not in the manual?
Questions and answers