Philips AVENT SCD710 User Manual page 5

Caution
Declaration of conformity
Compliance with EMF
- If batteries are damaged or leaking, avoid contact with the skin or eye�
If this occurs, immediately rinse well with water and seek medical care�
- When you handle batteries, make sure that your hands, the product
and the batteries are dry�
- Insert batteries with the + and - poles pointing in the direction
indicated in the battery compartment or holder�
- Do not mix different brands and types of batteries, do not mix new
and used batteries and do not use batteries with different date codes.
- Remove batteries from the product if you are not going to use it for
some time�
- To avoid accidental short-circuiting of batteries after removal, do not
let battery terminals come into contact with metal objects (e�g� coins,
hairpins, rings)� Do not wrap batteries in aluminium foil� Tape battery
terminals or put batteries in a plastic bag before you discard them�
- Do not leave empty disposable batteries inside the product�
- Rechargeable batteries have a limited number of charge cycles� Battery
life and number of charge cycles vary by use and settings�
- Replace the rechargeable battery when the battery capacity declines
significantly.
- Do not install the appliance near any heat sources such as radiators,
heat registers, stoves or other apparatus (including amplifiers) that
produce heat�
- Make sure that your hands are dry when you handle adapters, plugs
and the mains cord�
- All required markings on the baby unit, parent unit and power adapter
are located on the bottom of the baby unit, parent unit and power
adapter�
Hereby, Philips Consumer Lifestyle B.V. declares that this product is in
compliance with the essential requirements and other relevant provisions
of Directive 2014/53/EU. A copy of the EC Declaration of Conformity
(DoC) is available online at www�philips�com/support�
This product complies with all applicable standards and regulations
regarding exposure to electromagnetic fields.
- 5 -