Related Manuals for Blue Torrent MyBot
Summary of Contents for Blue Torrent MyBot
- Page 1 ROBOTIC POOL CLEANER FOR INGROUND POOLS Congratulations on purchasing Mybot Robotic Pool Cleaner. You have made an excellent choice. 11671...
- Page 2 READ THESE IMPORTANT OPERATING TIPS BEFORE USING YOUR UNIT Thank you for choosing the Mybot Pool Cleaner. In order to achieve optimal performance, please read and follow these steps: 1. Cleaner filter buckets should be thoroughly cleaned after each use or as often as needed to ensure cleaner’s optimal performance.
- Page 3 CAUTION Machines shall not be used by children. Children should be supervised to ensure that they do not play with the machine. This machine can be used by people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the machine in a safe way and understand the hazards involved.
- Page 4 SAFETY PRECAUTIONS Risk of electrical shock or electrocution. DANGER The electrical supply to this product must be installed in accordance with all applicable local codes and ordinances. Improper installation will create an electrical hazard which could result in death or serious injury to pool users or others due to electrical shock, and may also cause damage to property.
- Page 5 Congratulations! You have got the most advanced automatic swimming pool cleaner. The Mybot is easy to use, and will help you clean your swimming pool. Operated according to this manual, your Mybot robot will clean your pool quickly and effectively.
- Page 6 2. Connect the floating cable to the power supply control box. Use only the original Power Supply manufactured by Blue Torrent. Connect the floating cable to the control box. Make sure they are connected correctly. (The fitting on the cleaner floating cable should be connected with the control box by turning it the clockwise direction).
- Page 7 BRIEF INTRODUCTION Start/Stop Button 2. Floor Clean Only— To clean the pool floor only. 3. All Purpose Clean—All-around cleaning, including pool floor, pool wall and waterline. 4. Timed Stop (running time) — Choose the preferred running hours 2/3/5 hours. Press the button to chose the time you want, red light means the cleaner will work for 2 hours, green light for 3 hours, blue for 5 hours.
- Page 8 8. Indicator Lights: All Purpose Floor Clean Running Time Clean On Off Button Only FLOOR RUNNING PURPOSE CLEAN TIME CLEAN ONLY RUNNING TIME INDICATOR: Red Light Blinking — Means the Cleaner has been set for 2 Hours Green Light Blinking — Means the Cleaner has been set for 3 Hours Blue Light Blinking —...
- Page 9 MYBOT ROBOTIC POOL CLEANER PARTS Control Box...
- Page 10 MYBOT ROBOTIC POOL CLEANER PARTS PART # MODEL # DESCRIPTION AC 10421 Mybot Lid Cover (Outlet) AC 10421 Mybot Lid Cover AC 34266 Mybot Sealed Motor Unit AC 30007 Mybot Filter Bucket AC 10456 Mybot Side Panel AC 10464 Mybot Floating Cable...
- Page 11 As shown. • Take the cover, you will see filter buckets. Take the filter buckets out of the Mybot. • Flip the bucket assembly over to remove the debris & then rinse with a garden hose to...
- Page 12 • Reinstall the filter buckets in the right position, and make sure the concave of the filter bucket gets close to the inner edge of the robot, as shown. • Assemble the outlet, press the cover and turn it to ‘CLOSE’ position until it locked tightly.
- Page 13 STORAGE • When out of the water, store the CLEANER in a dry, shady location at temperatures between 39ºF — 110ºF. CABLE CARE • With continued use, the cable may become coiled (like a telephone cord). To correct this, periodically stretching the cord out in the sun should remove any cord twists. IMPORTANT: The cable should be checked periodically for any external damage.
- Page 14 TROUBLESHOOTING If CLEANER fails to pick up fine or heavy debris: • Clean the filter buckets. It may be clogged. A filter cleaning solution can be used to remove excessive dirt and/or sand. If CLEANER starts working momentarily but then stops working: •...
- Page 15 SAVE THESE INSTRUCTIONS 1. ALWAYS PUT THE CLEANER INTO THE WATER BEFORE CONNECTING IT TO THE ELECTRICAL OUTLET. 2. IT IS IMPORTANT FOR SWIMMERS’ SAFETY TO REMOVE THE UNIT IMMEDIATELY FOLLOWING USE. THIS CAN ALSO IMPROVE THE OPERATING LIFE OF YOUR CLEANER. 3.
- Page 16 • Customer must retain the original sales invoice as proof of purchase along • Commercial facilities are not covered by warranty Please return any and all defective items to your local authorized Blue Torrent dealer for inspection. The customer is responsible for all shipping charges to and from the nearest Factory Warranty Center.
Need help?
Do you have a question about the MyBot and is the answer not in the manual?
Questions and answers
I plug the pool cleaner in the control board lights up i press run and it starts and immediately stops and control board lights go out