Download Print this page

Blue Torrent MyBot Instructions Manual page 4

Robotic pool cleaner

Advertisement

DANGER
!
WARNING
!
WARNING
!
WARNING
!
CAUTION
!
WARNING
!
WARNING
!
CAUTION
!
4
SAFETY PRECAUTIONS
Risk of electrical shock or electrocution.
The electrical supply to this product must be installed in
accordance with all applicable local codes and ordinances.
Improper installation will create an electrical hazard which could
result in death or serious injury to pool users or others due to
electrical shock, and may also cause damage to property.
Do not play with cleaner or cable or apply to body. Can trap or
tear hair or body parts. Cable can trip or entangle swimmers
which could result in drowning.
The control box of appliance must be fixed securely on the
ground. Never operate the unit without fixing.
To reduce the risk of injury, do not let children use or play
with pool cleaner.
Before installing the cleaner, understand cleaner coverage.
The cleaner was not designed to automatically clean steps or
to work under a solar cover.
Your cleaner should not be used while people are swimming in
the pool.
The electric supply connection shall be made by a qualified
electrician and comply with IEC 60364-1. It is recommended that
the electric supply to this machine should include either a
residual current device that will interrupt the supply if the
leakage current to earth exceeds 30 mA.
Do not allow swimmers in the pool while pool cleaner is
operating.
DO NOT switch on the pool cleaner if it is not immersed in the
water.
Operating the cleaner out of the water may cause severe
damage and will result in loss of warranty. Always remember to
turn the power supply to "O" and unplug it from the power outlet
before removing the cleaner from the pool.

Advertisement

loading
Need help?

Need help?

Do you have a question about the MyBot and is the answer not in the manual?

Questions and answers

Ray
May 13, 2025

I plug the pool cleaner in the control board lights up i press run and it starts and immediately stops and control board lights go out