1. Manuals
  2. Brands
  3. UDOR Manuals
  4. Water Pump
  5. ZETA 70 Series
  6. Service manual

UDOR ZETA 70 Series Service Manual

Hide thumbs Also See for ZETA 70 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Diaphragm Pumps
&
Accessories
Service Manual
&
Parts Breakdown
Guide
Diaphragm Pumps & Accessories
Service Manual & Parts Breakdown Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZETA 70 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for UDOR ZETA 70 Series

Summary of Contents for UDOR ZETA 70 Series

  • Page 1 Diaphragm Pumps & Accessories Service Manual & Parts Breakdown Guide Diaphragm Pumps & Accessories Service Manual & Parts Breakdown Guide...

  • Page 2: Table Of Contents

    INDEX Service Manual ......2-11 ZETA Series ......12-43 IOTA Series.

  • Page 3: General Information

    16 MESH OFF VALVES property damage or damage to STRAINER the pump or system and void any UDOR DIAPHRAGM warranty. In no way does UDOR PUMP SAVER VALVE USA assume any liability or UDOR AGITATION SAFETY responsibility for the construction...

  • Page 4: Installation

    16 MESH OFF VALVES property damage or damage to STRAINER the pump or system and void any UDOR DIAPHRAGM warranty. In no way does UDOR PUMP SAVER VALVE USA assume any liability or UDOR AGITATION SAFETY responsibility for the construction...

  • Page 5: Troubleshooting

    TROUBLESHOOTING...

  • Page 6: Pump Operations

    It is important to maintain the recommended oil level, marked on the oil sight gauge. Only use UDOR LUBE premium pump oil. For any pump with a gear reduction, make sure the gear box is filled to the center of the sight glass or to the level plug with 90 wt.
  • Page 7 9. REFILL PUMP CRANKCASE Check the oil drain plug, making sure that it is installed in the crankcase. Fill the pump with UDOR LUBE premium pump oil or SAE 30 weight non-detergent oil to the recommended mark on the oil sight glass/ gauge;...

  • Page 8: Maintenance

    MAINTENANCE ROUTINE MAINTENANCE I f t h e P u m p is u sed f o r l ig h t -du t y p u r p o ses, t h e f o l l o w in g r o u t in e m a in t en a n c e j o b s a r e a dvised: A f t er t h e f ir st 5 0 h o u r s: O il c h a n g e .
  • Page 9 Install a new set of diaphragms. Inspect pump valves / check valves for spring fatigue and seat wear. Change oil using UDOR LUBE premium pump oil or a non-detergent 30 weight oil: rotate shaft while filling. This evacuates most unwanted air pockets. Run pump for five minutes under “no-load”...

  • Page 10: Oil And Weight

    OIL CAPACITIES & WEIGHTS 11. OIL AND WEIGHT RECOMMENDED OIL QUANTITY PUMP WEIGHT SERIES ZETA 70 0,50 1 10 0,56 19.2 ZETA-P 40 ZETA-P 85 1,02 2 25 1,14 38.4 ZETA-P 100 ZETA 85 1,02 1,14 2 25 38.4 ZETA 100 1,02 1,14 2 25...

  • Page 11: Torque Specifications

    TORQUE SPECIFICATIONS 12. TORQUE SPECIFICATIONS...
  • Page 12 TORQUE SPECIFICATIONS TORQUE SPECIFICATIONS MOD. N•m lbf•ft N•m lbf•ft N•m lbf•ft N•m lbf•ft N•m lbf•ft N•m lbf•ft N•m lbf•ft N•m lbf•ft N•m lbf•ft ZETA 70 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 13 Dimensions - ZETA 40P GR 16”L x 11”W x 12”H 110131 Weight - ZETA 40P GR 36 lbs 160528 Lubrication: Requires 39 oz. of Udor Lube 40W Premium Pump Oil. 110131 160125 140000 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 160528...
  • Page 14 110131 160125 140000 Weight - ZETA 40P 29 lbs 110142 160528 110131 010204 Lubrication: Requires 39 oz. of Udor Lube 40W Premium Pump Oil. 110125 030143 160125 110131 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 160387 140694 181624 090320...
  • Page 15 Dimensions - ZETA 40E GR 16”L x 11”W x 12”H 110131 Weight - ZETA 40E GR 36 lbs 160528 010204 Lubrication: Requires 39 oz. of Udor Lube 40W Premium Pump Oil. 110131 030143 160125 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 160528 110142...
  • Page 16 Dimensions - ZETA 40E 11”L x 11”W x 12”H 110131 Weight - ZETA 40E 29 lbs 160528 010204 Lubrication: Requires 39 oz. of Udor Lube 40W Premium Pump Oil. 110131 030143 160125 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 160528 110142...
  • Page 17 3/4” HB Bypass - Hose Barb Dimensions 10.5”L x 10”W x 9”H Weight 21 lbs Lubrication: Requires 20 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N 8700.62CK 010204 030143 090315...
  • Page 18 3/4” HB Bypass - Hose Barb Dimensions 10.5”L x 10”W x 9”H Weight 21 lbs Lubrication: Requires 20 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N 8700.62CK 010204 030143 090315...
  • Page 19 Dimensions - ZETA 85P GR 16”L x 11”W x 12”H 110131 160528 Weight - ZETA 85P GR 36 lbs 110131 Lubrication: Requires 39 oz. of Udor Lube 40W Premium Pump Oil. 160125 140000 160528 110142 110131 010204 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil.
  • Page 20 110131 Weight - ZETA 85P 29 lbs 140000 160125 160528 110142 110131 010204 Lubrication: Requires 39 oz. of Udor Lube 40W Premium Pump Oil. 110125 030143 160125 110131 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 160387 140688 181624 090320...
  • Page 21 Dimensions - ZETA 85 GR 16”L x 11”W x 12”H Weight - ZETA 85 GR 36 lbs 110131 160528 010204 Lubrication: Requires 39 oz. of Udor Lube 40W Premium Pump Oil. 110131 030143 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 160125 160528 110142...
  • Page 22 Dimensions - ZETA 85 VA 11”L x 11”W x 12”H 110131 Weight - ZETA 85 VA 29 lbs 160528 010204 Lubrication: Requires 39 oz. of Udor Lube 40W Premium Pump Oil. 110131 030143 160125 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 160528 110142...
  • Page 23 3/4” HB Bypass - Hose Barb Dimensions 10.5”L x 10”W x 9”H Weight 21 lbs Lubrication: Requires 20 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N 8700.61CK 606248 870010 6062D8...
  • Page 24 3/4” HB Bypass - Hose Barb Dimensions 10.5”L x 10”W x 9”H Weight 21 lbs Lubrication: Requires 20 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N 8700.61CK 606248 870010 6062D8...
  • Page 25 3/4” HB Bypass - Hose Barb Dimensions 10.5”L x 10”W x 9”H Weight 21 lbs Lubrication: Requires 20 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N 8700.61CK 606248 870010 6062D8...
  • Page 26 3/4” HB Bypass - Hose Barb Dimensions 10.5”L x 10”W x 9”H Weight 21 lbs Lubrication: Requires 20 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N 8700.61CK 606248 870010 6062D8...
  • Page 27 110101 110101 Dimensions 13”L x 11”W x 12”H 600677 Weight 45 lbs Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Revised 2-16-2022 Part # Description Part # Description 0001.02...
  • Page 28 Dimensions 13”L x 11”W x 12”H 110104 110142 Weight 45 lbs 600677 Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Revised 11-18-2021 Part # Description Part # Description 0001.02...
  • Page 29 110104 110142 Dimensions 13”L x 11”W x 12”H 600677 Weight 45 lbs Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Revised 2-16-2022 Part # Description Part # Description 0001.02...
  • Page 30 13”L x 11”W x 12”H 090631 110101 110101 Weight 45 lbs 600677 Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Revised 2-16-2022 Part # Description Part # Description 0001.02...
  • Page 31 Dimensions 13”L x 11”W x 12”H 110104 110142 Weight 45 lbs 600677 Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Revised 11-18-2021 Part # Description Part # Description 0001.02...
  • Page 32 15.5”L x 12.5”W x 17.5”H 090361 110101 110101 Weight 58 lbs 110102 110142 Lubrication: Requires 44 oz. of Udor Lube 40W Premium Pump Oil. 600677 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Revised 4-12-2022 Part # Description Part # Description 0001.08...
  • Page 33 030107 600677 090361 090361 Weight 58 lbs 110101 110101 110102 Lubrication: Requires 44 oz. of Udor Lube 40W Premium Pump Oil. 110142 600677 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Revised 4-12-2022 Part # Description Part # Description 0001.08...
  • Page 34 090314 030107 600677 090361 Weight 58 lbs 090361 110101 110101 Lubrication: Requires 44 oz. of Udor Lube 40W Premium Pump Oil. 110102 110142 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 600677 - Buna-N Revised 4-12-2022 Part # Description Part # Description 0001.08...
  • Page 35 600677 090361 090361 110101 110101 Weight 58 lbs 110102 110193 Lubrication: Requires 44 oz. of Udor Lube 40W Premium Pump Oil. 600677 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Revised 4-12-2022 Part # Description Part # Description 0001.08...
  • Page 36 15.5”L x 12.5”W x 17.5”H 090361 110101 110101 Weight 58 lbs 110102 110193 600677 Lubrication: Requires 44 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Revised 4-12-2022 Part # Description Part # Description 0001.08 RETAINER RING 1203.28...
  • Page 37 Dimensions 14.5”L x 15.5”W x 18.5”H KIT 527 KIT 636 KIT 672 Weight 80 lbs Lubrication: Requires 90 oz. of Udor Lube 40W Premium Pump Oil. 010201 030107 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 010201 110101 090361 090361...
  • Page 38 8700.44CK 606228 6062D3 6062H4 Weight 80 lbs KIT 527 KIT 636 KIT 672 Lubrication: Requires 90 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 010201 030107 010201 110101 090361 090361 030107 600677...
  • Page 39 Dimensions 14.5”L x 15.5”W x 18.5”H KIT 527 KIT 636 KIT 672 Weight 80 lbs Lubrication: Requires 90 oz. of Udor Lube 40W Premium Pump Oil. 010201 030107 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 010201 110101 090361 090361...
  • Page 40 110142 110193 Dimensions 14.5”L x 15.5”W x 18.5”H 600677 Weight 80 lbs Lubrication: Requires 90 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Revised 11-18-2021 Part # Description Part # Description 0001.10...
  • Page 41 110142 Dimensions 14.5”L x 15.5”W x 18.5”H 110193 600677 Weight 80 lbs Lubrication: Requires 90 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Revised 11-18-2021 Part # Description Part # Description 0001.08...
  • Page 42 20.5”L x 14.5”W x 23”H 110142 110193 1101D2 Weight 155 lbs 1101E3 6006A5 Lubrication: Requires 155 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Part # Description 1202.A5 BASE PLATE 1203.49 OIL RESERVOIR 1205.63...
  • Page 43 6006A5 1101E3 030176 110142 110193 Weight 155 lbs 1101D2 1101E3 Lubrication: Requires 155 oz. of Udor Lube 40W Premium Pump Oil. 6006A5 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Part # Description 1202.A5 BASE PLATE 1203.49 OIL RESERVOIR 1205.63...
  • Page 44 20.5”L x 14.5”W x 23”H 1101E3 110142 110193 Weight 155 lbs 1101D2 1101E3 6006A5 Lubrication: Requires 155 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Part # Description 1202.A5 BASE PLATE 1203.49 OIL RESERVOIR 1205.63...
  • Page 45 110110 010202 090308 Weight 33 lbs 090312 600621 030109 090312 110110 Lubrication: Requires 7 oz. of Udor Lube 40W Premium Pump Oil. 110110 110152 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 110152 1101A2 1101G4 600621 Revised 11-18-2021 Part #...
  • Page 46 IOTA 18 M GEAR REDUCTION AND MOUNTING HARDWARE SUPPLEMENT Ref # Description Ref # Description 0007.18 Seal 0902.19 Handle 0107.03 Base Plate 1403.05 Washer 0213.18 Gear, IOTA-18/M 1603.67 Oil Fill Plug 0228.17 Gear Housing 1603.69 Oil Sight Gauge 0303.47 Hex Nut M8x8 1804.57 Hex Bolt 0303.02...
  • Page 47 0908.31 115 VOLT ELECTRIC MOTOR FOR IOTA 18 M DIAPHRAGM PUMPS Ref # Description Ref # Description SWITCH BOX TERMINAL BLOCK CAPACITOR - 02-1238.33 FAN COVER - 02-12/14HP1 SCREW TIE-BEAM SWITCH BOX FAN - 02-12/14HP1 SCREW SHIELD SCREW SPRING WASHER CABLE LOCKER STATOR THREADED RING...
  • Page 48 090308 110110 010202 Weight 9 lbs 090308 090312 600621 030109 090312 Lubrication: Requires 7 oz. of Udor Lube 40W Premium Pump Oil. 110110 110110 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 110152 110152 1101A2 1101G4 600621 Revised 11-18-2021 Part #...
  • Page 49 110110 010202 090308 Weight 10 lbs 090312 600621 030109 090312 110110 Lubrication: Requires 7 oz. of Udor Lube 40W Premium Pump Oil. 110110 110152 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 110152 1101A2 1101G4 600621 Revised 11-18-2021 Part #...
  • Page 50 090305 090345 606368 030137 Weight 14 lbs 090344 110111 110111 110106 Lubrication: Requires 4 oz. of Udor Lube 40W Premium Pump Oil. 110178 110178 110111 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 110178 606368 Revised 11-18-2021 Part # Description...
  • Page 51 Weight 14 lbs 090305 090345 606368 030137 090344 110111 110111 110106 Lubrication: Requires 4 oz. of Udor Lube 40W Premium Pump Oil. 110178 110178 110111 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 110178 606368 Revised 11-18-2021 Part # Description...
  • Page 52 14 lbs 090344 090344 110178 010202 090305 090305 090345 606368 030137 090344 Lubrication: Requires 4 oz. of Udor Lube 40W Premium Pump Oil. 110111 110111 110106 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 110178 110178 110111 110178 606368 Revised 11-18-2021...
  • Page 53 6.6”L x 7.28”W x 6.02”H 110178 110178 110111 Weight 14 lbs 110178 606368 Lubrication: Requires 4 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. Revised 3-8-2022 Part # Description Part # Description 0002.50 SHAFT “KAPPA 7”...
  • Page 54 6.6”L x 7.28”W x 6.02”H 010202 Weight 14 lbs 030137 090344 090344 110178 010202 090305 Lubrication: Requires 4 oz. of Udor Lube 40W Premium Pump Oil. 090305 090345 606368 030137 090344 110111 110111 110106 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil.
  • Page 55 18 lbs 090308 090308 110127 010204 090308 090315 090343 606304 030143 Lubrication: Requires 12 oz. of Udor Lube 40W Premium Pump Oil. 090315 110127 110127 110104 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 110127 606304 Revised 1-21-2022 Part #...
  • Page 56 18 lbs 090308 090308 110127 010204 090308 090315 090343 606304 030143 Lubrication: Requires 12 oz. of Udor Lube 40W Premium Pump Oil. 090315 110127 110127 110104 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 110127 606304 Revised 1-21-2022 Part #...
  • Page 57 010204 Weight 29 lbs 090315 110127 110127 606304 030143 110141 Lubrication: Requires 20 oz. of Udor Lube 40W Premium Pump Oil. 110127 606304 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. Revised 1-21-2022 Part # Description Part # Description 0001.11 RETAINER RING 1203.28...
  • Page 58 110127 Dimensions 9.5”L x 12.5”W x 10.5”H 110141 606304 Weight 37 lbs Lubrication: Requires 23 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Revised 3-14-2022 Part # Description Part # Description 0001.06...
  • Page 59 3/4” HB 110141 606304 Dimensions 9.5”L x 12.5”W x 10.5”H Weight 37 lbs Lubrication: Requires 23 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Revised 3-14-2022 Part # Description Part # Description 0001.06...
  • Page 60 10.5”L x 11.5”W x 10.5”H 110195 Weight 29 lbs 1101B8 606304 Lubrication: Requires 20 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Inlet Outlet Revised 3 -14 -2022 Part #...
  • Page 61 10.5”L x 11.5”W x 10.5”H 1101B8 110131 110141 Weight 29 lbs 110195 1101B8 Lubrication: Requires 20 oz. of Udor Lube 40W Premium Pump Oil. 606304 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. - Buna-N Inlet Outlet Revised 3 -14 -2022 Part #...
  • Page 62 Bypass - Hose Barb 3/4” HB Dimensions 13.5”L x 14.0”W x 12.0”H Weight 46 lbs Lubrication: Requires 23 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. Inlet 8700.75CK - Buna-N 010204 030143...
  • Page 63 Bypass - Hose Barb 3/4” HB Dimensions 13.5”L x 14.0”W x 12.0”H Weight 46 lbs Lubrication: Requires 23 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. Inlet 8700.75CK - Buna-N 010204 030143...
  • Page 64 Bypass - Hose Barb 3/4” HB Dimensions 13.5”L x 17.0”W x 13.0”H Weight 51 lbs Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. Inlet 8700.80CK - Buna-N 010204 030143...
  • Page 65 Bypass - Hose Barb 3/4” HB Dimensions 13.5”L x 17.0”W x 13.0”H Weight 51 lbs Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. Inlet 8700.80CK - Buna-N 010204 030143...
  • Page 66 Bypass - Hose Barb 3/4” HB Dimensions 13.5”L x 17.0”W x 13.0”H Weight 51 lbs Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 8700.80CK Inlet - Buna-N 010204 030143...
  • Page 67 Bypass - Hose Barb 3/4” HB Dimensions 13.5”L x 17.0”W x 13.0”H Weight 51 lbs Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. Inlet 8700.80CK - Buna-N 010204 030143...
  • Page 68 (2) 1/2” Hose Barb Valve, 3/4” MPT Bypass 1” Hose Barb Dimensions 14.0”L x 18.0”W x 16.0”H Weight 46 lbs Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. Buna-N - 8700.82CK 010204 030143 6062F7...
  • Page 69 (2) 1/2” Hose Barb Valve, 3/4” MPT Bypass 1” Hose Barb Dimensions 14.0”L x 18.0”W x 16.0”H Weight 46 lbs Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. Buna-N - 8700.82CK 010204 030143 6062F7...
  • Page 70 (2) 1/2” Hose Barb Valve, 3/4” MPT Bypass 1” Hose Barb Dimensions 14.0”L x 18.0”W x 16.0”H Weight 46 lbs Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. Buna-N - 8700.82CK 010204 030143 6062F7...
  • Page 71 (2) 1/2” Hose Barb Valve, 3/4” MPT Bypass 1” Hose Barb Dimensions 14.0”L x 18.0”W x 16.0”H Weight 46 lbs Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. Buna-N - 8700.82CK 010204 030143 6062F7...
  • Page 72 19.0”L x 15.5”W x 14.5”H 1101J4 110101 110142 Weight 95 lbs 1101J4 600677 Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. Buna-N - Revised 11-17-2021 Part # Description Part # Description 0001.12...
  • Page 73 19.0”L x 15.5”W x 14.5”H 1101J4 110101 110142 Weight 95 lbs 1101J4 600677 Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. Buna-N - Revised 11-17-2021 Part # Description Part # Description 0001.12...
  • Page 74 Bypass 1” Hose Barb Dimensions 15.5”L x 21.5”W x 16.5”H Weight 110 lbs Buna-N - Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 8700.84CK 6062H7 606224 6062H8 010201 KIT 676...
  • Page 75 Bypass 1” Hose Barb Dimensions 15.5”L x 21.5”W x 16.5”H Weight 110 lbs Buna-N - Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 8700.84CK 6062H7 606224 6062H8 010201 KIT 676...
  • Page 76 17.7”L x 14.4”W x 15.4”H Weight 51 lbs 8700.30CK 6062E8 6062E7 6062D9 606216 Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. KIT 650 KIT 649 KIT 642 KIT 515 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 010201 030107...
  • Page 77 1” Hose Barb 020272 Dimensions 17.5”L x 15”W x 16”H 110142 Weight 100 lbs 110101 Lubrication: Requires 87 oz. of Udor Lube 40W Premium Pump Oil. 060409 600697 160128 180538 060826 140345 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil.
  • Page 78 6062E1 606236 8700.07CK Weight 120 lbs KIT 628 KIT 532 KIT 643 KIT 535 Lubrication: Requires 84 oz. of Udor Lube 40W Premium Pump Oil. 010201 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 030103 090316 090301 110101 010201 090316...
  • Page 79 6062E7 6062D9 606216 Weight 51 lbs KIT 650 KIT 649 KIT 642 KIT 515 Lubrication: Requires 40 oz. of Udor Lube 40W Premium Pump Oil. Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 010201 030107 090316 090302 110101 010201 090316...
  • Page 80 16.8”L x 14.9”W x 17.2”H Weight 120 lbs 8700.06CK 870006 606257 6062D9 606260 Lubrication: Requires 84 oz. of Udor Lube 40W Premium Pump Oil. KIT 627 KIT 556 KIT 642 KIT 559 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 010201 030103...
  • Page 81 16”L x 15.5”W x 12.6”H Weight 130 lbs 8700.07CK 870007 606233 6062E1 606236 Lubrication: Requires 87 oz. of Udor Lube 40W Premium Pump Oil. KIT 628 KIT 532 KIT 643 KIT 535 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 010201 030103...
  • Page 82 606261 6062E2 606264 Weight 200 lbs KIT 631 KIT 560 KIT 644 KIT 563 Lubrication: Requires 160 oz. of Udor Lube 40W Premium Pump Oil. 010201 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 030103 090362 090301 110101 010201 090362...
  • Page 83 606261 6062E2 606264 Weight 200 lbs KIT 631 KIT 560 KIT 644 KIT 563 Lubrication: Requires 160 oz. of Udor Lube 40W Premium Pump Oil. 010201 Alternate Oil: 30W non-detergent or 15W-40 non-detergent oil. 030103 090362 090301 110101 010201 090362...
  • Page 84 5027.75 GAS ENGINE GEAR REDUCTION FOR KAPPA-55, ZETA-40/85/120 DIAPHRAGM PUMPS on GAS ENGINES with 3/4” SHAFTS REQUIRES 16 OZ. 90W GEAR LUBE Revised 5-1-2020 Part # Description Part # Description 0004.18 GEAR SHAFT - 3/4” 1505.29 GEAR CASE - PUMP 0006.08 BEARING 1512.08...
  • Page 85 5033.A4 GAS ENGINE GEAR REDUCTION FOR KAPPA-55/75, DELTA-75, ZETA-120 DIAPHRAGM PUMPS on GAS ENGINES with 1” SHAFTS REQUIRES 17.25 OZ. 90W GEAR LUBE Part # Description Part # Description 0004.21 GEAR SHAFT “M164-1”” 1413.01 WASHER D15 0006.01 BUSHING D15 1505.28 GEAR BODY “M164”...
  • Page 86 5034.B5 GAS ENGINE GEAR REDUCTION FOR DELTA-100/KAPPA-121 DIAPHRAGM PUMPS on GAS ENGINES with 1” SHAFTS REQUIRES 28 OZ. 90W GEAR LUBE Part # Description Part # Description 0004.26 GEAR SHAFT “M162-1”VA” 1403.05 WASHER D8.4 0006.09 BUSHING D45 1403.12 GASKET D8.5 0006.10 BUSHING D30 1413.02...
  • Page 87 5047.D7 GAS ENGINE GEAR REDUCTION FOR KAPPA-15 DIAPHRAGM PUMPS on GAS ENGINES with 3/4” SHAFTS REQUIRES 2 OZ. 90W GEAR LUBE Revised 3-8-2022 Part # Description Part # Description 0004.19 GEAR SHAFT “S124-3/4”/S151-3/4” 1101.91 O-RING - BODY 0007.21 OIL SEAL D17 1403.05 WASHER M8 0213.32...
  • Page 88 5071.75 GAS ENGINE GEAR REDUCTION FOR KAPPA 32, KAPPA 43, DELTA 40 DIAPHRAGM PUMPS on GAS ENGINES with 3/4” SHAFTS REQUIRES 16 OZ. 90W GEAR LUBE Revised 2-1-2021 Part # Description Part # Description 0004.18 GEAR SHAFT - 3/4” 1411.03 SERATED WASHER D10 0006.08 BEARING...
  • Page 89 5085.F7 GAS ENGINE GEAR REDUCTION FOR KAPPA-25 DIAPHRAGM PUMPS on GAS ENGINES with 3/4” SHAFTS REQUIRES 3 OZ. 90W GEAR LUBE Part # Description Part # Description 0004.19 GEAR SHAFT “S124-3/4”/S151-3/4” 0614.11 SET SCREW M6X6 0007.21 OIL SEAL D17 1403.05 WASHER M8 0213.43 RED.GEAR WHEEL Z=40 “S151-GR”...
  • Page 90 5094.76 GAS ENGINE GEAR REDUCTION FOR IOTA-20 DIAPHRAGM PUMPS on GAS ENGINES with 3/4” SHAFTS REQUIRES 3 OZ. 90W GEAR LUBE Part # Description Part # Description 0004.19 GEAR SHAFT “S124-3/4”/S151-3/4” 0605.47 GASKET D13 0007.21 OIL SEAL D17 1403.05 WASHER M8 0213.13 RED.GEAR WHEEL Z=40 “S151”...
  • Page 91 5096.B5 GAS ENGINE GEAR REDUCTION FOR DELTA 170 DIAPHRAGM PUMPS on GAS ENGINES with 1-1/8” SHAFTS REQUIRES 28 OZ. 90W GEAR LUBE Part # Description Part # Description 0004.43 GEAR SHAFT “M162-1-1/8”VA” 1403.05 WASHER M8 0006.09 BUSHING D45 1403.12 GASKET D8.5 0006.10 BUSHING D30 1413.02...
  • Page 92 1238.N4 Adjustable Pressure Regulator Maximum Flow 40.0 GPM / 150 lpm Maximum Pressure 400 PSI / 27 bar Inlet Port 3/4” MNPT 9.301.7 410.214.6 Outlet Port Bypass - Hose Barb 3/4” HB 410.602.89 170.1902.18 9.801.6 175.602.52 170.1608.1 170.7.1 170.1603.10 411.208.139 170.1902.16 167.1702.1 410.1003.22...
  • Page 93 6010.G2 Remote Mounted Adjustable Pressure Regulator Maximum Flow 27.0 GPM / 102 lpm Maximum Pressure 350 PSI / 24 bar Inlet Port - Hose Barb 3/4” HB Outlet Ports - Hose Barb, Valve (3) 1/2” HB Bypass - Hose Barb 3/4”...
  • Page 94 6004.05 Adjustable Pressure Regulator Maximum Flow 32.0 GPM / 121 lpm Maximum Pressure 400 PSI / 41 bar Inlet Port - Hose Barb 3/4” HB Outlet Ports - Hose Barb, Valve (2) 1/2” HB Bypass - Hose Barb 1” HB KIT 555 GG1000 Revised 11-17-2021...
  • Page 95 6004.06 Adjustable Pressure Regulator Maximum Flow 32.0 GPM / 121 lpm Maximum Pressure 580 PSI / 40 bar Inlet Port - Hose Barb 3/4” HB Outlet Ports - Hose Barb, Valve (3) 1/2” HB Bypass - Hose Barb 1” HB KIT 555 GG1000 Revised 11-17-2021...
  • Page 96 6005.05/N Adjustable Pressure Regulator Maximum Flow 47.3 GPM / 179.2 lpm Maximum Pressure 1200 PSI / 81 bar Inlet Port 3/4” Male NPT Outlet Ports Bypass - Hose Barb 1” HB KIT 553 090130 180102 150707 121954 090205 090105 180536 010105 141102 150707...
  • Page 97 6005.05 Adjustable Pressure Regulator Maximum Flow 47.3 GPM / 179.2 lpm Maximum Pressure 1200 PSI / 81 bar Inlet Port 3/4” Male BSP Outlet Ports Bypass - Hose Barb 1” HB KIT 553 090130 180102 150707 121954 090205 090105 180536 010105 141102 150707...
  • Page 98 6005.08/N Adjustable Pressure Regulator Maximum Flow 66.0 GPM / 250 lpm Maximum Pressure 1200 PSI / 81 bar Inlet Port 3/4” MNPT Outlet Ports Bypass - Hose Barb 1-1/2” HB KIT 553 090130 180102 150707 121954 090205 090105 180536 010105 141102 150707 181001...
  • Page 99 6005.08 Adjustable Pressure Regulator Maximum Flow 66.0 GPM / 250 lpm Maximum Pressure 1200 PSI / 81 bar Inlet Port 3/4” Male BSP Outlet Ports Bypass - Hose Barb 1-1/2” HB KIT 553 090130 180102 150707 121954 090205 090105 180536 010105 141102 150707...
  • Page 100 6005.14/N Adjustable Pressure Regulator Maximum Flow 66.0 GPM / 250 lpm Maximum Pressure 1200 PSI / 81 bar Inlet Port 3/4” MNPT Outlet Ports Bypass - Hose Barb 1-1/4” HB KIT 553 Revised 11-17-2021 Part # Description Part # Description 0101.01 LEVER GUIDE 1101.31...
  • Page 101 6005.14 Adjustable Pressure Regulator Maximum Flow 66.0 GPM / 250 lpm Maximum Pressure 1200 PSI / 81 bar Inlet Port 3/4” Male BSP Outlet Ports Bypass - Hose Barb 1-1/4” HB KIT 553 Revised 11-17-2021 Part # Description Part # Description 0101.01 LEVER GUIDE...
  • Page 102 6005.15/N Adjustable Pressure Regulator Maximum Flow 47.3 GPM / 179.2 lpm Maximum Pressure 1200 PSI / 81 bar Inlet Port 3/4” Male NPT Outlet Ports Bypass - Hose Barb 1” HB KIT 553 Revised 11-17-2021 Part # Description Part # Description 0101.01 LEVER GUIDE...
  • Page 103 6005.15 Adjustable Pressure Regulator Maximum Flow 47.3 GPM / 179.2 lpm Maximum Pressure 1200 PSI / 81 bar Inlet Port 3/4” Male BSP Outlet Ports Bypass - Hose Barb 1” HB KIT 553 Revised 11-17-2021 Part # Description Part # Description 0101.01 LEVER GUIDE...
  • Page 104 6005.31-LP/N Adjustable Pressure Regulator Maximum Flow 32.0 GPM / 121 lpm Maximum Pressure 350 PSI / 24 bar Inlet Port - Hose Barb 3/4” Male NPT Outlet Port Bypass - Hose Barb 3/4” HB KIT 593 110106 020511 180810 Revised 11-17-2021 Part # Description Part #...
  • Page 105 6005.31-LP Adjustable Pressure Regulator Maximum Flow 32.0 GPM / 121 lpm Maximum Pressure 350 PSI / 24 bar Inlet Port - Hose Barb 3/4” Male BSP Outlet Port Bypass - Hose Barb 3/4” HB KIT 593 110106 020511 180810 Revised 11-17-2021 Part # Description Part #...
  • Page 106 6005.31/N Adjustable Pressure Regulator Maximum Flow 32.0 GPM / 121 lpm Maximum Pressure 600 PSI / 41 bar Inlet Port - Hose Barb 3/4” Male NPT Outlet Port Bypass - Hose Barb 3/4” HB KIT 593 110106 020511 180810 Part # Description Part # Description...
  • Page 107 6005.31 Adjustable Pressure Regulator Maximum Flow 32.0 GPM / 121 lpm Maximum Pressure 600 PSI / 41 bar Inlet Port - Hose Barb 3/4” Male BSP Outlet Port Bypass - Hose Barb 3/4” HB KIT 593 110106 020511 180810 Revised 11-17-2021 Part # Description Part #...
  • Page 108 6010.23 Adjustable Pressure Regulator Maximum Flow 5.0 GPM / 19 lpm Maximum Pressure 275 PSI / 19 bar Inlet Port - Hose Barb Outlet Ports - Hose Barb, Valve 3/8” HB Bypass - Hose Barb GG350 (Optional) 020441 150312 110106 060601 090174 110111...

  • Page 109: Pressure Regulators

    6010.24 & 6010.24/LP Pump Mounted Adjustable Pressure Regulators 6010.24 606253 606255 Maximum Flow 27.0 GPM / 102 lpm Maximum Pressure 560 PSI / 38 bar KIT 552 KIT 554 6010.24/LP Optional Maximum Flow 27.0 GPM / 102 lpm Maximum Pressure 350 PSI / 24 bar Inlet Port - Hose Barb Outlet Ports - Hose Barb, Valve...
  • Page 110 6010.25 & 6010.25/HP Adjustable Pressure Regulators 6010.25/HP 606253 606255 Maximum Flow 27.0 GPM / 102 lpm Maximum Pressure 560 PSI / 38 bar KIT 554 KIT 552 6010.25 Optional Maximum Flow 27.0 GPM / 102 lpm Maximum Pressure 350 PSI / 24 bar Inlet Port - Hose Barb 3/4”...
  • Page 111 6010.26 & 6010.26/HP Remote Mounted Adjustable Pressure Regulators 6010.26/HP 606253 606255 Maximum Flow 27.0 GPM / 102 lpm Maximum Pressure 560 PSI / 38 bar KIT 552 KIT 554 6010.26 Optional Maximum Flow 27.0 GPM / 102 lpm Maximum Pressure 350 PSI / 24 bar Inlet Port - Hose Barb 3/4”...
  • Page 112 6010.93 Adjustable Pressure Regulator Maximum Flow 27.0 GPM / 102 lpm Maximum Pressure 560 PSI / 38 bar Inlet Port - Hose Barb Outlet Ports - Hose Barb, Valve (2) 1/2” HB Bypass - Hose Barb 3/4” HB KIT 608 GG1000BM Revised 1-21-2022 Part #...
  • Page 113 6010.95 Adjustable Pressure Regulator Maximum Flow 27.0 GPM / 102 lpm Maximum Pressure 350 PSI / 24 bar Inlet Port - Hose Barb Outlet Ports - Hose Barb, Valve (2) 1/2” HB Bypass - Hose Barb 3/4” HB KIT 608 GG350BM Revised 1-21-2022 Part #...
  • Page 114 6010.96 Adjustable Pressure Regulator Maximum Flow 27.0 GPM / 102 lpm Maximum Pressure 350 PSI / 24 bar Inlet Port - Hose Barb Outlet Ports - Hose Barb, Valve (2) 1/2” HB Bypass - Hose Barb 3/4” HB KIT 608 GG350BM Revised 1-21-2022 Part #...
  • Page 115 6047.06/IND Adjustable Pressure Regulator Maximum Flow 27.0 GPM / 102 lpm Maximum Pressure 560 PSI / 38 bar Inlet Port Outlet Port 3/4” FPT Bypass - Hose Barb 3/4” HB 180810 020511 110106 GG1000 1291.B9 207P-12 Revised 1-24-2022 Part # Description Part # Description...
  • Page 116 6047.06/LP Adjustable Pressure Regulator Maximum Flow 27.0 GPM / 102 lpm Maximum Pressure 350 PSI / 24 bar Inlet Port - Hose Barb Outlet Ports - Hose Barb, Valve (2) 1/2” HB Bypass - Hose Barb 3/4” HB 180810 020511 110106 GG350 To Pump...
  • Page 117 6047.06 Adjustable Pressure Regulator Maximum Flow 27.0 GPM / 102 lpm Maximum Pressure 560 PSI / 38 bar Inlet Port - Hose Barb Outlet Ports - Hose Barb, Valve (2) 1/2” HB Bypass - Hose Barb 3/4” HB 180810 020511 110106 GG1000 To Pump...
  • Page 118 Adjustable Pressure Regulator Maximum Flow 32.0 GPM / 121 lpm Maximum Pressure 400 PSI / 41 bar Inlet Port - Hose Barb 3/4” HB Outlet Ports - Hose Barb, Valve (2) 1/2” HB Bypass - Hose Barb 1” HB GG350 Revised 11-17-2021 Part # Description...
  • Page 119 7.901.103 / 13.901.151 Turbine Spray Gun Long Range Spray Gun Maximum Flow 25.0 / 30.0 GPM / 95 / 114 lpm Maximum Pressure 850 PSI / 58 bar 006n 027n 027n 008n 011n 013n 009n 029/LR 031/LR 036n 0032 032/LR Revised 1-27-2022 Part # Description...
  • Page 120 22.901.161 & 22.901.163 High Pressure Adjustable Pattern Spray Gun Maximum Flow - 22.901.161 10.0 GPM / 38 lpm - 22.901.163 25.0 GPM / 95 lpm Maximum Pressure 3000 PSI / 200 bar Inlet - 22.901.161 3/8” FNPT - 22.901.163 1/2” FNPT Spray Tip - 22.901.161 1.5 mm...
  • Page 121 26.901.162 (Turbo) High Performance Adjustable Spray Gun Maximum Flow 15.0 GPM / 57 lpm Maximum Pressure 850 PSI / 58 bar 26.1304.33 71.602.6 26.801.5 29.1903.7 26.305.3 29.1702.26 26.1705.55 23.602.37n 26.1703.22 23.602.36n 26.605.50 71.602.6 26.1506.14 26.1707.2 23.1304.29 26.902.6 26.1902.20 68.602.10 29.208.131 26.1701.10 7.602.1 See Chart...
  • Page 122 26.901.400 (Turbo Industrial) High Performance Adjustable Spray Gun Maximum Flow 15.0 GPM / 57 lpm Maximum Pressure 850 PSI / 58 bar 26.1304.33 71.602.6 26.801.5 23.208.84 26.305.3 29.1702.26 26.1705.55 23.602.37n 26.1703.22 23.602.36n 26.605.50 71.602.6 26.1506.14 26.1707.2 23.1304.29 26.902.6 26.1502.45 26.1902.20 68.602.10 23.208.23 26.1701.10...

  • Page 123: Spray Guns

    37.901.20 & 37.901.30 High Pressure Adjustable Pattern Foaming Spray Gun 06-1242.39 Maximum Flow - 37.901.20 13.0 GPM / 50 lpm - 37.901.20 25.0 GPM / 95 lpm SPRAY GUN Maximum Pressure 3000 PSI / 200 bar REPAIR KIT Inlet - 37.901.20 3/8”...
  • Page 124 1238.M8 Trigger Spray Gun Maximum Flow 5.0 GPM / 19.5 lpm Maximum Pressure 300 PSI / 20 bar 29.1702.26 29.1003.24 23.602.34 4.802.13 29.1604.2 23.602.29 23.1603.14 23.1304.29 23.601.25 4.208.99 4.507.14 1.203.1 4.1504.30 260.602.14 4.602.46 29.902.8 4.1607.6 Revised 3-14-2022 Part # Description Part # Description 1.203.1...
  • Page 125 15.0003.13 Polypropylene Trigger Valve Maximum Flow 18.0 GPM / 68 lpm Maximum Pressure 400 PSI / 27 bar Inlet Port 1/2” FNPT Outlet Port 1/2” FNPT Revised 4-1-2020 Ref # Description Ref # Description PLUG CLIP - 1241.42 REPAIR KIT - 8711.07 TRIGGER - 1240.C9 INLET PIN TRIGGER PIN - 29.1607.3...
  • Page 126 29.1903.7 Trigger Spray Gun Maximum Flow 15.0 GPM / 57 lpm Maximum Pressure 850 PSI / 58 bar 29.1702.26 23.602.37n 23.602.36n 23.1304.29 29.208.131 29.1101.1 29.507.10 29.1607.3 23.1003.16 29.902.8 Revised 3-3-2022 Part # Description Part # Description 23.1003.16 SPRING 29.507.10 TRIGGER CLIP 23.1304.29 PLUNGER 29.902.8...
  • Page 127 23.208.84 Trigger Spray Gun Maximum Flow 15.0 GPM / 57 lpm Maximum Pressure 850 PSI / 58 bar 29.1702.26 23.602.37n 23.602.36n 23.1304.29 23.1003.16 29.507.10 29.1607.3 Revised 1-28-2022 Part # Description Part # Description 23.1003.16 Spring Spring 23.1304.29 Plunger Poppet Assy 23.602.36 O-Ring Seat...
  • Page 128 34.1302.2 High Performance Root Feeder Maximum Flow 10.0 GPM / 38 lpm Maximum Pressure 450 PSI / 30 bar Inlet 1/2” FNPT Revised 4-1-2020 01-29.1702.26 PLUG O-RING* SPRING* POPPET ASSY* O-RING* SEAT* 06-207P-8 01-23.1304.29 PLUNGER 1/2" FNPT SEAL* 01-8711.03 INLET ADAPTOR TRIGGER VALVE REPAIR KIT...
  • Page 129 144.504.6 High Pressure, Self-Cleaning Filter Maximum Flow 10.0 GPM / 37..9 lpm Maximum Pressure 1000 PSI / 68 bar Inlet Ports (2) 3/4” FNPT 144.208.101 Outlet Ports (2) 3/4” FNPT Flush Valve 1/2” BSP Male Ball Valve Revised 3-11-2022 167.1702.1 Part # Description 1101.H6...
  • Page 130 Polypropylene Inline Strainer For Diaphragm Pumps, Use 16 Mesh Screens UD1-16 Maximum Flow 10.0 GPM / 37.9 lpm Maximum Pressure 220 PSI / 15 bar For Plunger Pumps, Use 32 Mesh Screens Inlet Port 1” FNPT Outlet Port 1” FNPT UD1-32 Revised 3-11-2022 Part #...
  • Page 131 UD-1-1/4 / UD-1-1/2 Polypropylene Inline Strainer For Diaphragm Pumps, Use 16 Mesh Screens UD-1-1/4-16 Maximum Flow 10.0 GPM / 37.9 lpm Maximum Pressure 220 PSI / 15 bar UD-1-1/4-16 Inlet Port 1-1/4” or 1-1/2” FNPT Outlet Port 1-1/4” or 1-1/2” FNPT For Plunger Pumps, Use 32 Mesh Screens Revised 3-11-2022 UD-1-1/4-32...
  • Page 132 7751.A9 & 7751.A1 3/4” & 1” Male Solid Shaft Kits Pump Mounting Face 140309 180406 050102 120247 7751A3/775031 180504 180406 120202 Revised 3-1-2020 Part # Description Part # Description 0501.02 Seal Retainer Flange 1804.06 Hex Bolt 1202.02 Base Plate 1804.07 Hex Bolt 1202.47 Base Plate with Notch...
  • Page 133 7752.A2 Female PTO Coupler 091001 IOTA-17/20*, KAPPA-30/40/55 Pump DELTA-75, ZETA-40/85 Mounting 023002 Face 091002 090120 050102 010613 023002 180409 060901 140309 010613 180504 090509 180456 141104 121904 Revised 4-6-2021 Part # Description Part # Description 0106.13 Torque Arm Bracket 1219.04 PTO Safety Shield 0230.02 Chain...
  • Page 134 7702.01 1-3/8” Male PTO Shaft Kits Pump Mounting Face 121904 140309 050102 180406 120247 7753A6 180504 180406 120202 Revised 3-1-2020 Part # Description Part # Description 0501.02 Seal Retainer Flange 1403.36 Washer 1202.02 Base Plate 1804.06 Hex Bolt 1202.47 Base Plate with Notch 1804.07 Hex Bolt 1219.02...

  • Page 135: Terms & Conditions

    Ship Charge. DROP SHIPS Udor USA will drop ship directly to your customer for a $15.00 drop ship service fee per order. OPEN CREDIT TERMS & CONDITIONS Our standard term is Net 30 days. Once approved Udor USA will send an approval letter which specifies account number and credit limit.

  • Page 136: Return Policy

    Limited product warranty will apply to all return products. 10) Any product that has been left here past 60 days after contact from UDOR USA will become property of UDOR USA and will be properly disposed.

  • Page 137: Limited Product Warranty

    INCIDENTAL or CONSEQUENTIAL damages or expenses. The only and total liability of UDOR USA under this limited warranty or in any claim regarding or involving UDOR USA is expressly limited to the repair, replacement or purchase price of the product.
  • Page 138 World Leader in Diaphragm and Plunger Pumps 500 Apollo Drive Lino Lakes, MN 55014 Ph: 651-785-0666 Fax: 800-732-2670 World Leader in Diaphragm and Plunger Pumps DB222B www.udorusa.com Brand www.boominator.com Scan this QR Code info@udorusa.com to Visit www.udorusa.com...

This manual is also suitable for:

Zeta-p 40 seriesZeta-p 85 seriesZeta-p 100 seriesZeta 85 seriesZeta 100 seriesZeta 120 series ... Show all

Table of Contents