49
Here you simply select the Devices view which gives you a list of
registered devices. After selecting your camera or scanner in the list you
can either assign a new default profile or switch back to factory default.
The new standard settings installed with this release all use the device
default profile (except for settings for scanning negatives, since they
do not use device dependent profiles). The primary benefit of this new
feature is that you can now switch to your own custom input profile
without having to edit any of your existing settings.
Input (PC)
Functionality is basically the same as for Mac except that clicking the
Change button will open the Scanners and Cameras control panel which
shows the list of connected devices.
Here you can select properties for your device(s) which will bring up a
dialog box from where (e.g. Color Management tab) you can change the
color management e.g. the list of attached profile(s).
Please note that FlexColor will always choose the first profile found in the
list if more than one are present.