Setting The Threshold For Lineart Scans; Working With Presets - Hasselblad FLEXTIGHT X1 User Manual

key to restrict its movement to the horizontal direction.
• Clicking in the curve area while holding down the alt key changes the
numbers of grid lines.

Setting the Threshold for Lineart Scans

When you are scanning in Lineart mode, FlexColor applies a threshold
to create an image in which every pixel is either completely black or
completely white. In this case, the gradation curve is simply a vertical
line. You can move this line left or right to adjust the input level at which
the threshold is applied.


More
More
pixels pixels
go to go to
white black
Click and drag on the line to adjust the threshold level to the right (which
will cause more pixels to go to black) or the left (which will cause more
pixels to go to white).

Working with Presets

The Gradation Window, and many of the other image-correction
windows, includes a preset/reset button, which enables you to save your
favorite settings, load them and/or to reset the tool to the selected preset
or setup.
In all image correction windows, the preset/reset button looks
the same. Click on the button just once to return to your
saved preset or setup. Click and hold to open a pop-up menu
for selecting preset option (see below). Initially, the loaded
preset will be the one from the setup you chose for the scan.
However, if you have chosen another preset, then a click on the
preset/reset button will return to the saved preset settings.
97