Hasselblad FLEXTIGHT X1 User Manual page 29

9
OS X Requirements
OS X V 10.2.1 or later is required. We recommend updating to the latest
release available.
Devices can be connected by either SCSI or FireWire. Please note that if
you are connecting a SCSI device through a SCSI to FireWire device it
will be represented as a FireWire device – that is the bus number in the
device window will be 9.
To be recognized by OS X, devices connected to a standard SCSI adapter
must be present when booting the Mac. A SCSI device connected via a
SCSI to FireWire adapter will be recognized when the adapter is plugged
in. The SCSI device itself must be turned on before connecting the
adapter to FireWire or rebooting. In OS X the required memory for the
application is automatically allocated.
Support for non-admin users
User defined settings, batch presets and various calibration files are
located in <user home>/Library/Application Support/FlexColor where
write support is guaranteed. The standard settings are now located inside
the application bundle - therefore you are free to move the FlexColor
application to any location without losing access to these standard
settings.
Preferences file
FlexColor uses the OS X standard format for preference files.
The file name is dk.Hasselblad.FlexColor.plist.