Plustek escan A280 Enterprise User Manual page 41

Double Feed Detection
You can activate the Double Feed Detection function. Switch on this function to
check paper overlap (i.e., 2 or more pages stuck together when being fed through the
ADF). Enable Double Feed Detection under the Initial Settings will allow you to
easily Reset to Default under the Advanced Settings from the Main Menu. To
Enable/Disable 'Double Feed Detection', you must enable the 'Double Feed
Detection' function under the 'Advanced Settings' from the Main Menu.
Reset to Default
Tap on Reset to Default to reset the scan settings to default factory settings. The
following dialog opens to confirm the action.
37