Plustek escan A280 Enterprise User Manual page 19


Setting eScan as an Access Point
You may set eScan as an Access Point (AP), so that your mobile devices can
connect to a wired network via eScan.
Tap on Tethering & portable hotspot and Portable Wi-Fi hotspot to activate
eScan as a portable hotspot. Modify the Network SSID and the Security option if
necessary. Enter the Password, the password should contain at least 8 digits. You
may tick the checkbox of Show password to show the hidden password. Tap on Save
to save the settings and tap on Exit on the left column to exit this dialog.
Information
There will be a mark showed on the upper-left
corner of the main screen, you may use this eScan
as a portable hotspot.
15