Harbor Freight Tools ICON 70624 Owner's Manual & Safety Instructions

Professional digital display circuit tester with interchangeable shanks

Download this manual

Owner's Manual & Safety Instructions

Save This Manual

operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

Email our technical support at: productsupport@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2024 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Keep this manual for the safety warnings and precautions, assembly,

Visit our website at: http://www.harborfreight.com

PROFESSIONAL

DIGITAL DISPLAY CIRCUIT TESTER

WITH INTERCHANGEABLE SHANKS

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

24f

70624

Need help?

Do you have a question about the ICON 70624 and is the answer not in the manual?

Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
Page 2 Specifications Voltage Range 3-49VDC Working Current <10mA Cord Length 12 ft. Wire Gauge 18 AWG Important Safety Information General Safety Warnings WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
Page 3 Changes or modifications not expressly approved by Harbor Freight Tools could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 4 Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ELECTRICAL CONNECTIONS: Disconnect the Circuit Tester from all power sources before performing any inspection, maintenance, or cleaning procedures. Do not use damaged equipment.