Harbor Freight Tools Cen-Tech 5645 Assembly & Operating Instructions

Magnetic base with fine adjustment

Brought to You by Augusta Flint

MAGNETIC BASE

WITH FINE ADJUSTMENT

ASSEMBLY & OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

2000 by Harbor Freight Tools

contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight

Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual

product may differ slightly from the product described herein. Tools required for assembly and service may not

be included.

For technical questions or replacement parts, please call 1-800-444-3353.

5645

REV 05h, 09i

Table of Contents

Need help?

Do you have a question about the Cen-Tech 5645 and is the answer not in the manual?

Page 1 SAVE THIS MANUAL. Copyright © 2000 by Harbor Freight Tools ® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Page 2 Brought to You by Augusta Flint THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model___________ Serial No._____________ Purchase Date_____________ Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram.
Page 3 Brought to You by Augusta Flint Do not use this product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the product.
Page 4 Brought to You by Augusta Flint Unpacking When unpacking your Magnetic Base, check to make sure the following parts are included. If any parts are missing or borken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353. Part # Description Quantity Base...