Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2017 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this
product. Failure to do so can result in
serious injury. SAVE THIS MANUAL.
17l
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Harbor Freight Tools PITTSBURGH 63655
Summary of Contents for Harbor Freight Tools PITTSBURGH 63655
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in product. Failure to do so can result in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing serious injury.
-
Page 2: Specifications
4. Keep Caliper away from water, oil, These carry important safety information. solvents and any other liquids. If unreadable or missing, contact 5. Do not lubricate the Caliper’s moving parts. Harbor Freight Tools for a replacement. Page 2 For technical questions, please call 1-888-866-5797. Item 63655... - Page 3 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Make sure upper and lower 5. To adjust (if needed), loosen Outside Diameter Jaw (2) faces the Dial Adjustment Lock (3) by are clean.
- Page 4 11. To use the Caliper to measure the outside diameter of an object, close the Outside Diameter Jaws over the object, making sure that the object rests squarely on the Jaws. See Figure C, below. Figure C 12. To use the Caliper to measure the inside diameter of an object, see Figure D, below. Figure D Page 4 For technical questions, please call 1-888-866-5797.
- Page 5 13. To make a depth measurement of an object, see Figure E. Figure E 14. To measure the step of an object, see Figure F. Figure F Item 63655 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Parts List And Diagram
Parts List and Diagram Part Description Qty. Thumb Roll Outside Diameter Jaws Dial Adjustment Lock Dial Adjustment Dial Slide Scale Lock Sliding Index Edge Inside Diameter Jaws Step Measuring Surface Depth Measuring Blade PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. - Page 7 Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 63655 For technical questions, please call 1-888-866-5797.
- Page 8 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797...
Need help?
Do you have a question about the PITTSBURGH 63655 and is the answer not in the manual?
Questions and answers
Can I purchase just the plastic thumb roll holder for a skull 63655 caliper?
The manual states that some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. It does not confirm whether the plastic thumb roll holder is available for purchase.
This answer is automatically generated