Calypso Instruments Ultra Low Power LoRa User Manual page 9

5. General information
5.1. General recommendations
Regarding mounting the unit, align the mark of the Ultra Low Power LoRa to the place where you
are aiming.
Make sure to install the sensor in a location free from anything that obstructs the flow of wind
to the sensors within a 2 meter radius.
Other important aspects:
- Do not attempt to access the transducers area with your fingers;
- Do not attempt any modification to the unit;
- Never paint any part of the unit or alter its surface in any way.
- NOT allow to be submerged fully or partially in water.
If you have any questions or doubts, please contact us directly.
5.2. Maintenance and repair
The Ultra Low Power LoRa does not require great maintenance thanks to the lack of the moving
parts in this new design. Transducers must be kept clean and aligned. Impacts or incorrect
impulsive handling may lead to transducers misalignment.
The space around the transducers must be empty and clean. Dust, frost, water, etc... will make
the unit stop working. The Ultra Low Power LoRa can be wiped clean with a damp cloth being
careful to not touch the transducers.
5.3 Warranty
This warranty covers the defects resulting from defective parts, materials and manufacturing, if
made known to the manufacturer within 24 months after the purchase date.
Warranty is void in case of non-following the instructions of use, repair or maintenance without
written authorisation. Any wrongful use by the user will not incur any responsibility on part of
Calypso Instruments; therefore, any harm caused to the Ultra Low Power LoRa by a mistake will
not be covered by the waranty. Using assembly elements different from those delivered with
the product will void the waranty. Changes on transducers position/alignment will void any
warranty.
For further information please contact Calypso Technical support through
sales@calypsoinstruments.- com or visit www.calypsoinstruments.com.
Ultra Low Power LoRa Wind Meter User manual
8