Trouble Shooting Guide - Breville BES820XL Manual

TROuBLE SHOOTINg guIDE

pROBLEM
When the machine is switched
on, the steam and hot water lights
are flashing.
Coffee does not run through
Coffee runs out too quickly
Coffee is too cold
pOSSIBLE CAuSES
Selector Control is not in 'Standby'
position
Machine is not turned on or plugged in
Water tank is empty
Coffee grind is too fine
Too much coffee in the filter
Coffee tamped too firmly
The filter is blocked
The coffee grind is too coarse
Not enough ground coffee in the filter
Ground coffee not tamped firmly enough
Cups not preheated
Milk not heated enough (if making a
cappuccino or latté)
WHAT TO DO
Turn the Selector Control to 'Standby' position.
Machine will commence normal heat up
procedure.
Ensure the machine is plugged in and the POWER
button is pressed to 'on'.
Refer to 'Filling The Water Tank', page 14.
Ensure you use a suitable espresso grind.
'The Grind' on page 22.
Refer to 'Preparing The Coffee', page 15.
Refer to 'Tamping The Coffee', page 15.
Use the fine pin on the cleaning tool to clear the
holes.
Refer to 'Cleaning The Filters', page 24.
Ensure you use a suitable espresso grind.
'The Grind' on page 22.
Refer to 'Preparing The Coffee', page 15.
Refer to 'Preparing The Coffee', page 15.
The cup warming plate starts to warm up as the
machine warms up.
Refer to 'Pre-Warming The Cups',
page 14.
When the base of the jug becomes too hot to
touch this is when the milk is heated at the correct
temperature.
Refer to 'How To Texture Milk For A
.
Cappuccino Or Latté' page 19
Refer to
Refer to
27