Operating Your Breville Die Cast Series Espresso Machine; Filling The Water Tank - Breville 800ESXL Manual

OPERATING YOUR BREVILLE DIE CAST SERIES™ ESPRESSO MACHINE
STEP 1 – FILLING THE WATER TANK
• Ensure the Power On/Off button is 'Off' and
the Selector Control is set to the '•'
Standby position.
• Turn the machine off at the power outlet
and unplug the power cord.
• Remove the Filter Holder if locked into the
Brew Head and move the Steam Wand to the
side of the machine.
• Remove the Water Tank by pulling with
the handle insert in the front of the
Espresso Machine.
• When the Water Tank is removed, a black tube
slides and extends out from the Water Tank
storage area. Do not touch or try to remove
this tube, it will automatically slide back into
position when the Water Tank is reinserted.
• Fill the Water Tank with cold water to the
maximum mark on the Water Window and
slide the Water Tank carefully back into
position in the machine.
NOTE: Check the water level before use
and replace the water daily.
The water tank should be
refilled with fresh cold water
before each use.
Do not use mineral or distilled
water or any other liquid.

OPERATING YOUR BREVILLE DIE CAST SERIES ESPRESSO MACHINE

13