Operating Your Breville Die Cast Series™ Espresso Machine - Breville ESPRESSO MACHINE Owner's Manual

Operating
OPERATING YOUR BREVILLE DIE CAST SERIES™ ESPRESSO MACHINE
• Remove the Filter Holder if locked into
the Brew Head and move the Steam
Wand to the side of the machine.
• Remove the Water Tank by pulling with
the handle insert in the front of the
Espresso Machine.
• When the Water Tank is removed, a black
tube slides and extends out from the
Water Tank storage area. Do not touch
or try to remove this tube, it will
automatically slide back into position
when the Water Tank is reinserted.
• Fill the Water Tank with cold water to
the maximum mark on the Water
Window and slide the Water Tank
carefully back into position in the
machine.
STEP 1 – FILLING THE WATER TANK
NOTE: Check the water level
• Ensure the Power On/Off button is 'Off'
before use and replace the
and
water daily.
the Selector Control is set to the '•'
Standby position.
The water tank should be
refilled with fresh cold
• Turn the machine off at the power outlet
water before each use.
and unplug the power cord.
Do not use mineral or
• Alternatively the Water Tank can be
accessed from the rear of the machine.
Press the button at the back of the Cup
Warming Plate and the Water Tank Filler
will open. Ensure the Water Tank is fitted
firmly into position. Fill with cold water
to the maximum mark on the Water
Window and close the Water Tank Filler.
OPERATING YOUR BREVILLE DIE CAST SERIES ESPRESSO MACHINE
1 3