Table Of Contents; Safety Information - Home Decorators Collection N608B-BN Use And Care Manual

Table of Contents

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pre-installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Safety Information

1. To reduce the risk of electric shock, ensure electricity has been
turned off at the circuit breaker or fuse box before beginning.
2. All wiring must be in accordance with the National Electrical Code
"ANSI/NFPA 70" and local electrical codes. Electrical installation
should be performed by a quali ed licensed electrician.
3. The outlet box and support structure must be securely mounted
and capable of reliably supporting a minimum of 50 lb (22.7 kg)
or less. Use only UL Listed outlet boxes marked "FOR FAN
SUPPORT."
4. The fan must be mounted with a minimum of 7 ft (2.1 m)
clearance from the trailing edge of the blades to the oor.
5. Avoid placing objects in the path of the blades.
6. To avoid personal injury or damage to the fan and other items,
be cautious when working around or cleaning the fan.
7. Do not use water or detergents when cleaning the fan or fan
blades. A dry dust cloth or lightly dampened cloth will be suitable
for most cleaning.
8. After making electrical connections, spliced conductors should
be turned upward and pushed carefully up into the outlet box.
The wires should be spread apart with the grounded conductor
and the equipment-grounding conductor on one side of the outlet
box and ungrounded conductor on the other side of the outlet box.
9. All set screws must be checked and retightened where necessary
before installation.
10. Suitable for use with solid-state speed control (RH787NRZBW300
only).
READ AND SAVE THESE INSTRUCTIONS
2 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Application Set-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The following responsible party designated in FCC §2.909 is responsible
for this declaration:
Model Number: N608B-BN, N608B-MBK, N608B-MWH
Company Name: TAL INTERNATIONAL CORPORATION
Company Address: 2919 E. Philadelphia St., Ontario, CA 91761, U.S.A.
Telephone Number: (909) 923-2888 Fax: (909) 923-8337
WARNING: To reduce the risk of electric shock, this fan must
be installed with an isolating wall control/switch.
WARNING: To reduce the risk of personal injury, do not bend
the blade arms (also referred to as anges), when installing the
brackets, balancing the blades or cleaning the fan.
WARNING: Do not insert foreign objects between rotating fan
blades.
WARNING: To reduce the risk of re, electric shock or personal
injury, mount the fan to an outlet box marked acceptable for
fan support with the screws provided with the outlet box.
WARNING: To reduce the risk of re, electric shock, or injury
to persons, observe the following:
a) Use this unit only in the manner intended by the manufacturer.
If you have questions, contact the manufacturer.
b) Before servicing or cleaning unit, switch power off at service
panel and lock the service disconnecting means to prevent
power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
CAUTION: To reduce the risk of personal injury, use only the
screws provided with the outlet box.
NOTE: Suitable for use in DAMP locations.
2
7
14
17
18
19