Toshiba RD-XS35 Owner's Manual page 46

Recording
Recording a TV program (Continued)
Customizing the MN mode
1) During stop or at step 3 on
QUICK MENU.
2) Press / to select "User record quality" then
press ENTER.
3) Change the setting for each recording media.
• Press /
• Press ADJUST to select the setting
number (1 - 5).
e.g.
User record quality
Custom setting
You can customize each setting.
Press / /
or '"Audio quality", then press ADJUST to
change the value.
4
) Press ENTER.
The menu disappears.
46
4
page 45, press
to select "HDD" or "DVD".
Setting 1 – – –
HDD DVD
Manual 6.6 L-PCM SP 4.6 D/M1
Setting Mode Rate Audio quality
1 Manual 6.6 L-PCM
2 SP 4.6 D/M1
3 LP 2.2 D/M1
4 Manual 6.0 D/M2
5 Manual 3.2 D/M1
Total recording time: approx. 71min.
(with 4.7 GB unused)
SETUP
/ to select "Mode", "Rate"
You can set in advance the desired mode for each
recording media ("HDD", "DVD"). See below.
Also for your customization of the MN mode, see below.
Press REC.
Recording starts.
REC
Notes
• To record a high quality picture, select "MN" to raise a bit
rate. The higher the bit rate, the better the picture quality is,
but the shorter the recording length becomes. We
recommend that you set this between 6.0 Mbps and 6.8
Mbps.
• You can change the combination of picture and audio
quality settings also by displaying the Quick Menu on
LIBRARY MENU or in stop mode, then selecting "User
Record Quality". Either of the above methods updates the
setting of this recorder.
• If you set "SP" or "LP", you cannot select "L-PCM".
• Depending on the audio quality settings, the upper limit for
the picture quality setting differs.
• You can adjust the manual rate for picture quality by
0.2 Mbps from 2.0 to 9.2. (You cannot set the rate from 1.4
to 2.0.)