Operational Settings - Toshiba RD-XS35 Owner's Manual

Function setup
Customizing the function settings (Continued)

Operational settings

Operation beep
HDD DVD-RAM DVD-RW
Turn on or off a confirmation beeper announcing when a
command is received.
Off:
Turns off the beep sound.
On:
Turns on the beep sound.
Note
• You cannot turn off beeps for alerts irrespective of this
setting.
Completion beep
HDD DVD-RAM DVD-RW
This is used to set whether or not a buzzer sounds when
dubbing and certain functions are finished.
Off:
Buzzer does not sound.
On:
Buzzer sounds.
Note
• You cannot turn off beeps for alerts irrespective of this
setting.
IR code
Switches the remote control codes to operate the
recorder. If you use the second and third TOSHIBA HDD/
DVD video recorders, set the different remote codes for
each recorder to avoid confusion in the response of the
recorders.
For details about this setting, refer to "Operating the
second and third TOSHIBA HDD/DVD video recorders
with the remote control of this recorder" (
"INSTALLATION GUIDE").
Instant skip interval
HDD DVD-RAM DVD-RW
Sets how much time is skipped when INSTANT SKIP
button is pressed.
5 sec. : 10 sec. : 30 sec. : 5 min.
152
DVD-R DVD-VIDEO VCD
DVD-R
page 50,
DVD-R DVD-VIDEO VCD
Instant replay interval
CD
HDD DVD-RAM
Sets how far back is replayed when INSTANT REPLAY
button is pressed.
5 sec. : 10 sec. : 30 sec. : 5 min.
Title thumbnail point
HDD DVD-RAM
For recorded titles, sets how far a scene from the start is
set as the title thumbnail.
0 sec. : 3 sec. : 10 sec. : 35 sec. : 1 min. : 5 min.
Note
• Thumbnails can also be changed to other scenes.
See page 126.
HDD/RAM title play
HDD DVD-RAM
Sets the resume play per title.
Title resume:
Remembers the point where you stop playback.
Allows you to resume the playback from that point.
Serial playback:
You can play back titles (Original, Playlist) stored in
the HDD or a DVD-RAM continuously.
Because there is no division between titles, the
recorder remembers only the last point where you
stopped playback.
Still group interval
DVD-RAM
Sets an interval for display of still pictures (in seconds)
when playing back a collection of still images.
1 sec. : 2 sec. : 3 sec. : 5 sec. : 10 sec. : Default
Priority contents
CD
To select the playback priority between JPEG (picture)
files and MP3/WMA (audio) files.
Photo: JPEG files take priority over MP3/WMA files.
Audio: MP3/WMA files take priority over JPEG files.
Note
• If this selection does not correspond to disc contents, the
recorder will take a longer time to start playback of the disc.
DVD-RW DVD-R DVD-VIDEO
DVD-RW DVD-R
VCD CD