Scheppach DWP400 Translation Of Original Instruction Manual page 19

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE 0113 not being observed
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise
yourself with your product and to use it for its intended
purpose.
The operating manual includes important instruc-
tions for the safe, proper and economic operation of
the product, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the product in your country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such products must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Product description (Fig. 1)
1. Handle
2. Mains cable
3. Hose connection port
4. Pump connection bend
5. Pressure connection
6. Suction strainer
7. Float switch clip
8. Float switch
3. Scope of delivery
Item
3
4
4. Proper use
The machine may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or injuries
of any type resulting from this. An element of the intended
use is also the observance of the safety instructions, as
well as the assembly instructions and operating informa-
tion in the operating manual. Persons who operate and
maintain the machine must be familiar with it and must be
informed about potential dangers. In addition, the appli-
cable accident prevention regulations must be strictly ob-
served. Other general occupational health and safety-re-
lated rules and regulations must be observed. The liability
of the manufacturer and resulting damages are excluded
in the event of modifications of the machine.
The product is intended exclusively for private use for
drainage in the house and garden area.
Permissible pumped liquid:
Clear water or wastewater
www.scheppach.com
Quantity Designation
1x Operating manual
1x Waste water combination pump
1x Hose connection port
1x Pump connection bend
GB | 19