CeoTronics CT-DECT Multi M7 Operating Manual page 53

16 SIG - Signalling
The CT-DECT Multi M7 generates various audio signals and voice outputs to inform the user
about various events (e.g. battery status) or as a confirmation of a user input (e.g. MIC ON or
OFF).
The ratio of the volume of this sound signalling and voice output to normal communication
with other participants can be set by the user.
A change is applied immediately and confirmed to the user by short beeps.
To set the signalling, use the SIG menu item:
EXPERT profile
DECT
BLUETOOTH
WIRELESS PTT
COMLINK
SETTINGS
DISPLAY TIMEOUT
LED INDICATION
LANGUAGE
SIG
+12 +6
The default setting is 0dB.
A change is retained even after restart.
0 -6 -12 -18 -24 -30
dok7039-en-01-0924
16 SIG - Signalling
53 / 68