CeoTronics CT-DECT Multi M7 Operating Manual page 31

BaseSelect - procedure
1. The user sets the number of base devices on their standard device (see Selecting the
number of base devices [} 31]
2. The user subscribes his standard device once to the base devices of each target group
(see Subscribing DECT [} 26]).
3. The user selects the base device of the target group on his standard device (see Select-
ing the base device [} 32]).
If you switch back to one of the other groups, it is no longer necessary to re-subscribe the
base device to the target group.
It is also possible to return to the initial group without re-subscribing to the base device of the
the group.
8.1 Selecting the number of base devices
If the CT-DECT Multi M7 is set as the standard device, it can be used with various base
devices. To do this, it is necessary to select the number of base devices.
To do this, use the NUMBER OF BASE STATIONS menu item:
EXPERT profile
DECT
SUBSCRIPTION
FP PP
BASE SELECTION
NUMBER OF BASESTATIONS
dok7039-en-01-0924
8 BaseSelect
31 / 68