CeoTronics CT-DECT Multi M7 Operating Manual page 10

3 Applications
3.1 Application: independent DECT group
In this scenario, a DECT group with up to five CT-DECT Multi M7s is set up.
One of the devices must be set as the base device of the group. To do this, it must work with
either the BASE or the EXPERT profile. If the EXPERT profile is selected, it must also be as-
signed the 'FP' role.
The remaining devices in the DECT group are subscribed on that device and must be set as
standard devices. To do this, they must work with either the STANDARD or the EXPERT pro-
file. If the EXPERT profile is selected, the devices concerned must also be assigned the 'PP'
role.
The following shows an example configuration in which the base device works with the EX-
PERT profile and assumes the FP role. The 4 standard devices all work with the STANDARD
profile and therefore automatically assume the PP role:
PROFILE = required profile
10 / 68 dok7039-en-01-0924
® ®