CeoTronics CT-DECT Multi M7 Operating Manual page 45

11.3 ASR in combination with 3M™ PELTOR™ ComTac™ VIII
Use the quick access menu of the CT-DECT Multi M7 to access the ASR function (see Quick
access menu [} 22])
The intensity of the ASR function of the 3M™ PELTOR™ ComTac™ VIII can be regulated in
five stages. Press the A- or A+ button to switch through the levels.
NOTICE
In addition to the description in this manual, please also refer to the description of the ASR
setting options in the operating manual of your 3M™ PELTOR™ ComTac™ VIII.
ASR ASR
volume volume
Press to finish
down up
The default setting is level 1 - ASR off.
Level
Level 1
Level 2
Level 3
Level 4
Level 5
NOTICE
After each restart, the ASR intensity is reset to the default setting. A change to this setting
is therefore not saved permanently.
Signalling sound
OFF
1x short
dok7039-en-01-0924
11 ASR-Control (Ambient Sound Reception)
Feature
ASR off
ASR muffled
ASR natural
ASR amplified
ASR max
45 / 68