CeoTronics CT-DECT Multi M7 Operating Manual page 32

8 BaseSelect
8.2 Selecting the base device
The base device can be selected either via the menu or a shortcut.
8.2.1 Selecting the base device via the menu
If the number of base devices in the CT-DECT Multi M7 is set to > 1, the base device to be
used can be selected.
To do this, use the BASE SELECTION menu item:
EXPERT profile
DECT
SUBSCRIPTION
FP PP
BASE SELECTION
NOTICE
The CT-DECT Multi M7 used as the standard device can only be used with one base
device at a time.
8.2.2 Selecting the base device via shortcut
If the number of base devices in the CT-DECT Multi M7 is set to > 1, the base device to be
used can be selected.
To do this, use the BASE shortcut.
NOTICE
The BASE shortcut is only available when using a headset.
Call up the selection of the base device by pressing and holding the left button until BASE X
appears on the display.
EXPERT
Press
32 / 68
Drücken
dok7039-en-01-0924