RGBlink Mini-Edge-2S User Manual page 93

Others: do not run multiple video capture or editing software simultaneously
6.1)Or use typeC to USB3.0 hub to connect the computer and mini-edge
6.2)Or use USB software->ProcessControl_1.0.0.2 to improve performance of computer(in the
attachment)
6.3)Lower the output resolution
6.4)Unplug and plug the USB3.0 cable and re-enter the streaming software.
6.5)Change the USB2.0 cable to do streaming (note that the picture quality is lower than the
USB3.0 cable, and the USB2.0 cable is not recommended to use the PVW output)
7. Does mini-edge support HDCP?
A: The HDMI input supports the HDCP protocol, HDMI input 1 port supports HDCP2.X, the other
input ports support HDCP1.X, and the output does not support HDCP protocol encryption
8. mini-edge HDMI input what kind of YUV.
A：mini-edge supports 4:4:4，not supports 4:2:0.
9. When mini-edge input is i format signal will be half-screened or cut with the P format
signal, the height of the P format will be cut.
A ： At present, the latest program can automatically determine the i/P signal source and
automatically adjust the cropping value.
10. Can mini-edge control PTZ of Pelco protocol?
A：Currently, the PTZ controlling this protocol is not supported, mini-edge supports to control
Visca protocol PTZ.
11. Insert USB disk for recording into mini-edge, mini-edge turns into black screen?
A：It means that the USB disk is in a read-only state, please use computer to unlock the USB disk.
© Xiamen RGBlink Science & Technology Co., Ltd.
| support@rgblink.com | www.rgblink.com
Ph: +86 592 5771197
92