Victaulic 867-43T-PS Installation, Operation And Maintenance Manual

INSTALLATION, OPERATION, AND MAINTENANCE MANUAL
867-43T-PS Pump Suction Pressure Control Valve
• These products shall be used only in fire protection systems that are designed and installed in accordance with current, applicable National
Fire Protection Association (NFPA) standards, or equivalent standards, and in accordance with applicable building and fire codes. These
standards and codes contain important information regarding protection of systems from freezing temperatures, corrosion, mechanical
damage, etc.
• These installation instructions are intended for an experienced, trained installer. The installer shall understand the use of this product and
why it was specified for the particular application.
• The installer shall understand common industry safety standards and potential consequences of improper product installation.
Failure to follow installation requirements and local and national codes and standards could compromise system integrity or cause system
failure, resulting in death or serious personal injury and property damage.
REV_A
WARNING
• Read and understand all instructions before attempting to install any Victaulic products.
• Always verify that the piping system has been completely depressurized and drained
immediately prior to installation, removal, adjustment, or maintenance of any Victaulic
products.
• Wear safety glasses, hardhat, and foot protection.
Failure to follow these instructions could result in death or serious personal injury and property
damage.
I-867-43T-PS
HANG THESE INSTRUCTIONS ON THE
INSTALLED VALVE FOR FUTURE REFERENCE
I-867-43T-PS