Inventini PASCAL User Manual page 5

INSTRUCTIONS
Inflate setup
Fig. 1
Fig. 2
REPAIR
www.inventini.com
1. Choose a flat even spot where you want to pitch the sofa.
Deflate setup
2. Unzip the bag and take out the product.
3. Make sure the pump valve is in the INFLATE SETUP (Fig. 1)
4. We recommend first inflating the backrest and then the seat.
1. Set up the pump valve in the DEFLATE SETUP (Fig. 1).
2. Pack the product into the transport bag.
A small hole can be repaired by using repair kit - glue and foil.
If the product foil is damaged:
1. Locate the damage.
2. Degrease the surface.
3. Apply the adhesive to the hole, taking care that the adhesive does
4. Apply the foil patch.
5. Wait 60 minutes for the adhesive to fully bond.
There is a possibility of sending the product back to the manufacturer.
We o er paid service for mechanical damage.
Use the pump to inflate the product until you feel it is completely
taut (Fig. 2).
not get inside the product.
ASSEMBLY
DISASSEMBLY
DAMAGE
EN
5