Safety Rules; General Terms Of Warranty - Inventini PASCAL User Manual

SAFETY RULES

RECOMMENDATIONS
CAUTION
GENERAL TERMS
OF WARRANTY
4
1. Inflatable sofa and sofa U are not adapted to severe weather
conditions such as strong winds, heavy rains, storms or hailstorms.
2. In case of strong winds, disassemble the sofa.
3. Keep the product away from sources of heat and open flames. Please
do not place any sources of heat direclty at the sofas because the
materials can melt at high temperatures.
4. By special order, you can have your sofa made of flame retardant
fabric (which meets the standards of B1 requirements).
1. Read these instructions carefully before you get to work.
2. Be cautious while setting up the product to avoid being hurt and
prevent other damage.
3. Before disassembling the structure, the product must be thoroughly
cleaned. Any spots or stains on the fabric should be removed
immediately with a warm damp cloth. Do not use pressure washers.
Follow the instructions on the label.
4. Storing a dirty or damp sofa can result in a breakdown of the
materials as fabrics tend to mold, mildew and/or rot. Before putting
your product in its transport bag for storage, make sure it is clean
and dry. Store it in a dry place to avoid moisture contamination. In
case of bad weather, repack your product to avoid damage, but as
soon as it's possible, unpack it once again to let it dry.
5. Take special care when transporting and storing the product.
6. Do not expose the product to mechanical impact, pressing with other
products or contact with sharp objects, as this can lead to damage to
the insert and the product tipping over.
7. The sofa is designed to sit for two people. Do not stand or kneel on the
product. The maximum load of the product is 200 kg.
8. Sofa-U is designed for sitting for 4 people. Do not stand or kneel on the
product. The maximum load of the sofa is 250 kg.
9. Do not use the product on uneven ground, as it may tip over.
10. Do not use a damaged product.
The air in the product changes it's volume under the influence
of temperature. High temperature increases the volume of air.
The product becomes more taut. Low temperature reduces the
volume of air. The product becomes less taut.
General terms of warranty can be downloaded from the
manufacturer's website.
PASCAL SOFAS ASSEMBLY INSTRUCTIONS