Advertisement
Quick Links
LOUDBOX MINI CHARGE HEAD REMOVAL GUIDE
Use a 4mm Hex wrench to remove the 6 screws that hold the head into the cabinet. There are 3 on each side.
To free the head from its seated position, lift the back of the head. This will help slide it back in the cabinet.
Advertisement
Related Manuals for Fishman LOUDBOX MINI LBC-500
Summary of Contents for Fishman LOUDBOX MINI LBC-500
- Page 1 LOUDBOX MINI CHARGE HEAD REMOVAL GUIDE Use a 4mm Hex wrench to remove the 6 screws that hold the head into the cabinet. There are 3 on each side. To free the head from its seated position, lift the back of the head. This will help slide it back in the cabinet.
- Page 2 Sliding the head toward the back of the cabinet will give clearance from the front inner corner protectors. Once the head is clear of the front inner corners, lift the head up with the handle.
- Page 3 The head can be tilted back to access the plug on connectors for the cables. There are 2 main cable connectors and 2 Bluetooth connectors. The battery cable is on the right side of the poweramp board. Press down on the clip to release it from the connector.
- Page 4 One main cable is in the center of the poweramp board. Press down on the clip to release it from the connector. One Bluetooth cable is in the center of the preamp board. Grabbing close to the connector will allow you to gently work the connector off.
- Page 5 The other Bluetooth cable is on the upper right side. Grabbing close to the connector will allow you to gently work the connector off. Once all the wires are disconnected, the amp head can be removed completely from the cabinet.
Need help?
Do you have a question about the LOUDBOX MINI LBC-500 and is the answer not in the manual?
Questions and answers