Related Manuals for Aurora ASP-882S
Summary of Contents for Aurora ASP-882S
- Page 1 USERS GUIDE ASP-882S 8x8 4K60 HDMI Matrix with ARC www.auroramm.com Manual Number: 250201...
-
Page 2: Safety Instructions
Please review the following safety precautions. If this is the first time using this model, then read this manual before installing or using the product. If the product is not functioning properly, please contact your local dealer or Aurora for further instructions. -
Page 3: Table Of Contents
USERS GUIDE TABLE OF CONTENTS PACKAGE CONTENTS ................................. 4 INTRODUCTION ..................................5 About ....................................5 Features ....................................5 Front ....................................6 Rear ..................................... 7 IR Remote ................................... 8 IR Cable Pin Assignment ..............................9 EDID Management ................................10 On-panel button operation: ..............................10 WEB GUI USER GUIDE ............................... -
Page 4: Package Contents
USERS GUIDE PACKAGE CONTENTS Please make sure the following items are included within your package. 1x 18Gbps 8 x 8 HDMI Matrix 1x 12V/5A Power Adapter 1x IR Remote 1x IR Receiver Cable (1.5m) 1x RS-232 Serial Cable (1.5m, male to female head) 1x AC Power Cord (US, 1.5m) 2x Mounting Ear 8x Machine Screw (KM3*6) -
Page 5: Introduction
USERS GUIDE INTRODUCTION About The 18Gbps 8x8 HDMI Matrix supports the transmission of video (up to 4K2K@60Hz YUV 4:4:4) and multi-channel high resolution digital audio from 8 HDMI sources to 8 HDMI displays. Audio de- embedded to analog and coaxial audio is supported from 8 HDMI output ports. While HDMI output ARC function is enabled, the ARC audio from HDMI display devices will be extracted to coaxial audio output. -
Page 6: Front
USERS GUIDE Front Name Function Description Display matrix switching status, input / output port, EDID, Baud rate, IP Address. OLED screen The LED will light in green when the product is powered on, and red when the product is on standby. Power LED IR window IR receiver window, only receiving the IR remote signal of this product. -
Page 7: Rear
USERS GUIDE Rear Name Function Description If the IR receiver window of the unit is blocked or the unit is installed in a closed area out of infrared line of sight, the IR receiver cable can be inserted to the “IR EXT” port to receive the IR remote signal. IR EXT Analog audio output port, connected to an amplifier or speaker via a L/R OUT (1~8) -
Page 8: Ir Remote
USERS GUIDE IR Remote Power on or Standby: Power on the Matrix or set it to standby mode. Input 1/2/3/4/5/6/7/8: Select input source button. : Select the last or next input source button. Output 1/2/3/4/5/6/7/8: Select output source button. All: Select all output sources simultaneously. For example, when you press the “All”... -
Page 9: Ir Cable Pin Assignment
USERS GUIDE The second way: If the IR receiver window of the Matrix is blocked or the Matrix is installed in a closed area out of infrared line of sight, the IR receiver cable can be inserted to the “IR EXT” port to receive the IR remote signal. -
Page 10: Edid Management
USERS GUIDE EDID Management This Matrix has 21 factory defined EDID settings, 2 user-defined EDID modes and 8 copy EDID modes. You can select defined EDID mode or copy EDID mode to input port via front panel buttons, RS-232 control or Web GUI. On-panel button operation: Press the EDID button for 3 seconds to switch EDID mode between AUTO and MANUAL. - Page 11 USERS GUIDE The defined EDID setting list of the product is shown below: EDID Mode EDID Description 1080p, Stereo Audio 2.0 1080p, Dolby/DTS 5.1 1080p, HD Audio 7.1 1080i, Stereo Audio 2.0 1080i, Dolby/DTS 5.1 1080i, HD Audio 7.1 3D, Stereo Audio 2.0 3D, Dolby/DTS 5.1 3D, HD Audio 7.1 4K2K30_444, Stereo Audio 2.0...
-
Page 12: Web Gui User Guide
USERS GUIDE WEB GUI USER GUIDE The Matrix can be controlled by Web GUI. The operation method is shown as below: Step 1: Get the current IP Address. The default IP address is 192.168.1.100. You can get the current IP address in two ways: The first way: You can get the IP address via panel button. -
Page 13: Status Page
USERS GUIDE Select the Username from the list and enter the password. The default passwords are: Username User Admin Password user admin After entering the password, click the “LOGIN” button and the following Status page will appear. ■ Status Page The Status page provides basic information about the Model, the installed firmware version and the network settings of the device. - Page 14 USERS GUIDE ① Output: The current device’s OUTPUT port. You can select signal source for it. ② Input: You can select signal source for the corresponding OUTPUT port. ③ Presets Name: You can name the current scene with maximum length of 12 ④...
- Page 15 USERS GUIDE Click the “Browse” button, then select the bin file. If you select the wrong EDID file, there will be a prompt, as shown in the following figure: Make sure to select the correct file, then you can check the name of the selected file. Select “User 1”...
- Page 16 USERS GUIDE ① Outputs: Output channel of the device. ② Name: The current output channel’s name. You can modify it in the input box (max length: 12 ③ Cable: It indicates the connection status of output ports. When the output port is connected to characters, Chinese name is unsupported).
-
Page 17: Network Page
USERS GUIDE ■ Network Page Set the Default Network Click “Set Network Defaults”, there will be a prompt, as shown in the following figure: Click “OK” to search the IP Address again, as shown in the following figure: www.auroramm.com... - Page 18 USERS GUIDE After searching is completed, it will switch to the login page, the default network setting is completed. Modify Username Click the “User” button, enter the correct Old Password, New Password, and Confirm Password, then click “Save”. After successful modification, there will be a prompt, as shown in the following figure: Note: Input rules for changing passwords: (1) The password can’t be empty.
- Page 19 USERS GUIDE ■ System Page ① Panel Lock: Click “Panel Lock” to lock/unlock panel buttons. “On” indicates that panel buttons ② Beep: Click “Beep” to turn on/off the beep. are unavailable; “Off” indicates panel buttons are available. ③ LCD: You can turn on/off the LCD and set the turn-on time (15s/30s/60s). ④...
-
Page 20: Application
USERS GUIDE APPLICATION Amplifier 2.0 Speakers Power Supply TV box Monitor DVD or Blu-ray Player The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. www.auroramm.com... -
Page 21: Connector Pin Definition
USERS GUIDE CONNECTOR PIN DEFINITION HDMI TMDS Data2+ Pin 8 TMDS Data0 Shield Pin 15 Pin 1 Pin 2 Pin 9 Pin 16 TMDS Data2 Shield TMDS Data0– Pin 3 TMDS Data2– Pin 10 TMDS Clock+ Pin 17 DDC/CEC Ground Pin 4 TMDS Data1+ Pin 11... -
Page 22: Cat5E/6/6A
RS-232 The RS-232 is a 3.5mm TRS connector. Tip is TX (output), ring is RX (input), and Sleeve is ground. To simplify connections Aurora offers pre-molded RS-232 cables in null and none nulled in male and female DB9. IR (Infrared) It will autosense a TS or a TRS connector to determine if an IR emitter (TS) or IR receiver (TRS) is inserted. -
Page 23: Troubleshooting
USERS GUIDE APPENDIX 1 Troubleshooting It is advisable to make certain all units are using the latest firmware before troubleshooting. Also make sure all network connections are operating on 1G. Web Server is Not Responding Make certain PC is on same VLAN, Network IP range, and subnet ... -
Page 24: Firmware Update
USERS GUIDE APPENDIX 2 Firmware Update For the latest firmware updates please go www.auroramm.com. You must sign up to the Customer Portal to download firmware with instructions on how to update. www.auroramm.com... -
Page 25: Protocol
USERS GUIDE APPENDIX 3 Protocol The product also supports RS-232 control. You need a serial cable with RS-232 male head and DB9 transfer USB male head. The RS-232 head of the serial cable is connected to the RS-232 control port with DB 9 at the rear of the Matrix, and the USB head of the serial cable is connected to a PC. - Page 26 USERS GUIDE Responds with ~RTx1 x2 x3 x4 x5 x6 x7 x8<cr> x1-x8 = output relative to input. Example: Output 1 is routed to input 7 so position x1 would equal 7. If nothing is routed to an output then the value will be 0 (zero). ?RT<cr>...
-
Page 27: Technical Specifications
USERS GUIDE APPENDIX 4 Technical Specifications Technical HDMI Compliance HDMI 2.0b HDCP Compliance HDCP 2.2 and HDCP 1.4 Video Bandwidth 18Gbps Up to 4K2K@50/60Hz (4:4:4) Video Resolution Color Space RGB, YCbCr 4:4:4/4:2:2/4:2:0 Color Depth 8-bit, 10-bit, 12-bit HDMI Audio Formats (Pass- LPCM 2/5.1/7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X through) Coax Audio Formats... -
Page 28: Warranty
Limited 3 Year Warranty Aurora Multimedia Corporation (“Manufacturer”) warrants that this product is free of defects in both materials and workmanship for a period of 3 years as defined herein for parts and labor from date of purchase. This Limited Warranty covers products purchased in the year of 2025 and after. - Page 29 USERS GUIDE Aurora Multimedia Corporation 205 Commercial Court | Morganville, NJ 07751 Phone: 732-591-5800 | Fax: 732-591-5801 www.auroramm.com...
Need help?
Do you have a question about the ASP-882S and is the answer not in the manual?
Questions and answers