Ultra-Clean Guitar Tone With Triangle Chorus; Semitone-Variable Pitch Shifter And Detuner; Pitch Shift Out Level; Pitch - Fender CYBER-TWIN Instruction Manual

42
3 U H V H W ( G L W
Description
Adjustable parameters
Description
Adjustable parameters
[ [ [ [
Semi-tone = Half-step
              
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
) ; 0 R G H
Ultra-clean guitar tone with Triangle Chorus. For best results, use with
clean amp settings and your guitar's neck (rhythm) pickup.
FX
Wet Out Level. Adjusts the wet/dry signal ratio. Select between 1.0
/
for 0% wet (no effect) and 10.0 for 100% wet (all effect).
Chorus Rate (Hz). Range: from 0.08 Hz to 10 Hz. Adjusts the rate of

the chorus effect. The increment of change gradually increases from
0.01 Hz for the slowest rate to 0.08 Hz for the fastest rate.
Chorus Depth. Adjusts the amount of Doppler shift and how apparent

the Chorus effect sounds. Select between 1.0 for no apparent Chorus
effect and 10.0 for maximum effect.
Body. Adjusts the amount of low frequencies in this effect. Select

between 1.0 for reduced bass and 10.0 for boosted bass.
Brilliance. Adjusts the amount of high frequencies in this effect. Select

between 1.0 for reduced treble and 10.0 for boosted treble.
~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~

Semitone-variable pitch shifter and detuner.

Pitch Shift Out Level. Adjusts the wet/dry signal ratio. Select between
/
1.0 for 0% wet (no effect) and 10.0 for 100% wet (all effect).
Pitch. Adjusts the semi-tone shift value of this effect within a four

octave range. Select between 1.0 for a shift two octaves down and
10.0 for a shift two octaves up from the dry, input pitch. Adjustment
increments are made in semi-tones intervals with 5.5 being in unison
with the input signal (no shift). Note that the farther from center (5.5)
that you turn the knob, the more apparent the effect will be.
Pitch Detune. Adjusts the offset from a nominal semi-tone within one

tone. Select between 1.0 for a detune one semi-tone flat and 10.0 for a
detune one semi-tone sharp. Adjustment increments are made in
micro-tone intervals with 5.5 (default) being in unison with the input sig-
nal (no detuning).
Pitch Feedback. Adjusts how much signal from the Pitch Shifter effect

is recycled back to the input. Select between 1.0 for minimum levels
and 10.0 for maximum levels. High feedback levels allow a portion of
the signal to repeat the cycle many times thereby compounding the
pitch shifts.
Pitch Pre-Delay. Adjusts the amount of delay before the pitch-shifted

signal is heard. Can be used with the Pitch Feedback control to get
continuously rising or falling pitch cascades with a fixed time change
interval. For the most transparent pitch shifting, turn this control to 1.0.
                                         & < % ( 5  7 : , 1