Table of Contents
Advertisement
40
3 U H V H W
( G L W
Description
Adjustable parameters
[ [ [ [
To use MIDI continuous
controller messages to instantly
change the delay time, set Delay
Time Change to the Step setting.
Description
Adjustable parameters
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
) ;
0 R G H
D e l a y + F l a n g e
Mono Delay plus stereo Triangle Flange.
FX
Wet Out Level. Adjusts the wet/dry signal ratio. Select between 1.0
/
for 0% wet (no effect) and 10.0 for a 50% mix.
Delay Time (ms). Range: 30 to 1450 milliseconds. Adjusts the time
interval between the delayed repeats. The increment of change gradu-
ally increases from 1 millisecond at the shortest delay time to 10 milli-
seconds at the longest delay time. Remember that the TAP button can
always be used to key in delay times by feel.
Flange Depth. Adjusts the amount of Doppler shift and how apparent
the Flange effect sounds. Select between 1.0 for no apparent effect
and 10.0 for maximum effect.
Delay Feedback. Adjusts the number of delay repeats. Select
between 1.0 for a single delay repeat and 10.0 for many repeats.
Flange Rate (Hz). Range: from 0.08 Hz to 10 Hz. Adjusts the rate of
the flange effect. The increment of change gradually increases from
0.01 Hz for the slowest rate to 0.08 Hz for the fastest rate.
Delay Time Change. Select Ramp or Step to change the way the
effect responds to changes in the Delay Time parameter. With the
Ramp setting, the delay time change will be gradual with an analog
sounding pitch warble, (audible until the delay time stabilizes). With the
Step setting, the delay time change will be instant with a "digital zip"
sound audible for a moment.
~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~ ~~ ~ ~~ ~~ ~~ ~~ ~~
D e l a y + P h a s e r
Mono Delay plus stereo Phaser.
FX
Wet Out Level. Adjusts the wet/dry signal ratio. Select between 1.0
/
for 0% wet (no effect) and 10.0 for a 50% mix.
Delay Time (ms). Range: 30 to 1450 milliseconds. Adjusts the time
interval between the delayed repeats. The increment of change gradu-
ally increases from 1 millisecond at the shortest delay time to 10 milli-
seconds at the longest delay time. Remember that the TAP button can
always be used to key in delay times by feel.
Phaser Depth. Adjusts the width of the phaser sweep and how appar-
ent the Phaser effect sounds. Select between 1.0 for no apparent
effect and 10.0 for maximum effect.
Delay Feedback. Adjusts the number of delay repeats. Select
between 1.0 for a single delay repeat and 10.0 for many repeats.
Phaser Rate (Hz). Range: from 0.08 Hz to 10 Hz. Adjusts the rate of
the Phaser effect. The increment of change gradually increases from
0.01 Hz for the slowest rate to 0.08 Hz for the fastest rate.
& < % ( 5
7 : , 1
Hide quick links:
Advertisement
Table of Contents
